The Effect of Exenatide Compared to Lantus Insulin on Vascular Function in Type 2 Diabetes

The trial is a randomized, controlled, comparator study. Subjects and investigators will not be blinded due to the nature of the treatment. After providing informed consent and meeting the inclusion and exclusion criteria, subjects will undergo baseline studies then be randomized to either treatment with Exenatide or Lantus insulin to achieve comparable improvement in glycemic control, as measured by HbA1c. A computer program (randomization.com) will be utilized to randomize 72 patients to receive either Exenatide or Lantus. The treatment group will receive twice daily injections of Exenatide, initially of 5ug BID, and increased to 10ug BID after 1 month. The control group will receive daily injections of Lantus insulin each evening, which will be titrated to achieve blood glucose targets based on self monitoring of blood glucose (SMBG), as outlined by the American Diabetes Association (ADA) (goal: fasting 90-130, peak postprandial less than180 mg/dl). The subjects on Lantus should achieve this goal by week 6 of the study, so that they have six weeks of maximal therapy. The control group will receive Lantus with the goal of similar glycemic control between the groups, with a goal of HbA1c reduction of 0.5-1.5% after 3 months. Based on recent data, it should be feasible to accomplish similar improvements in glycemia between the groups.

The trial will be preceded by a one-week screening and evaluation period, during which time the patient will be informed about the trial, and qualification will be determined based on the inclusion/exclusion criteria, as noted below. The patient will also be instructed in injection technique and SMBG techniques at the screening visit. Subjects will be asked to perform daily fasting blood glucose monitoring, and in addition on 2 days per week (1 weekday and 1 weekend day) to obtain 6 blood glucose measurements (fasting, 1-2hours post-breakfast, pre-lunch, 1-2 hours post-lunch, pre-dinner, and 1-2 hours post-dinner). Baseline studies will then be performed at week 0, including fasting laboratory studies, FMD, PWA, and Meal Challenge Test. The subject will then be randomized to receive treatment with either Lantus or Exenatide for 12 weeks duration. Repeat studies will then be performed at 12 weeks, including repeat of the baseline laboratory studies, FMD, PWA, and Meal Challenge test.

Schedule/Flow Chart

Visit 1 (week -1): Potential participants will be informed regarding the trial, records will be reviewed, and inclusion/exclusion criteria will be evaluated. Informed consent will be administered, and a history and physical will be performed. They will have baseline labs drawn, including HbA1c, glucose, lipids, CBC, chemistry, renal function, liver function, and urinalysis. If they are female and of reproductive age, they will also have a urine HCG performed. Subjects will be fasting for this visit.

Visit 2 (week 0): Participants will come in fasting. Interval medical history and medications will be reviewed. Vital signs will be obtained. PWA and FMD will be performed. The patient will then have fasting labs drawn which will include glucose, insulin, c-peptide, lipids, free fatty acids (FFA), CRP, TNFA, IL-6, ICAM, VCAM, endothelin 1, PAI-1 protein, PAI-1 activity, and FOX2. The patient will then have a mixed meal (time 0), and labs will again be drawn at 15, 30 minutes, 45 minutes, 60 minutes, 120 minutes, 180 minutes, and 240 minutes after the meal challenge measuring glucose, insulin, c-peptide, lipids, and FFA. At time 120 minutes, FWA and FMD will be performed again along with blood samples for CRP, TNFA, IL-6, ICAM, VCAM, endothelin 1, PAI-1 protein, PAI-1 activity, and FOX2. At 240 minutes, PWA, FMD, and TNG will be performed.

After completion of these tests, the patients will be randomized and start treatment with either Exenatide 5ug BID or nightly Lantus beginning the following day. Lantus dose will be based on clinical assessment, but starting doses will likely be between 10 and 20 units. Patients will be instructed in SMBG techniques, as well as injection techniques for either Byetta (Exenatide) or Lantus.

Week 1: Telephone contact. Review side effects and blood glucoses (BGs), adjust Lantus if needed, and adjust oral hypoglycemic agents (OHA) in Exenatide treated group if clinically indicated.

Week 2: Telephone contact. Review side effects and BGs, adjust Lantus if needed, and adjust OHA in Exenatide treated group if clinically indicated.

Visit 3 (week 4): Patients will come in. Those in the Exenatide group will have the dose increased to 10ug sq BID. The patients in the Lantus group will have their fasting BGs reviewed and their dose adjusted. Side effects will be reviewed with all subjects. Subjects in the Exenatide treated group will have their OHA adjusted if clinically indicated.

Week 6: Telephone contact. Review BGs and side effects, and adjust Lantus if needed. Lantus dose should be at/close to maximal dose to achieve target fasting blood glucose goal. Subjects in the Exenatide treated group will have their OHA adjusted if clinically indicated.

Week 8: Telephone contact. Review side effects and BGs, adjust Lantus if needed, and adjust OHA in Exenatide treated group if clinically indicated.

Week 10: Telephone contact. Review side effects and BGs, adjust Lantus if needed, and adjust OHA in Exenatide treated group if clinically indicated. At this time, we will discuss with the subjects if they are interested in continuing their study medication upon completion of the study. We will advise them to call their diabetes provider to then arrange for a prescription that will start upon study completion. We will advise them at the beginning of the study to set up a follow up appointment with their provider around the time of study completion. We will speak with their diabetes provider if the subject wishes us to do so.

Visit 4 (week 12): Participants will come in fasting. If they are in the Exenatide group, we will ask them not to take their morning dose at home, but to bring it in with them so that it can be administered within 60 minutes of the meal tolerance test. Subjects will also be asked to return any unused study drug at this final visit. Interval medical history and medications will be reviewed. Vital signs will be obtained. PWA and FMD will be performed. The patient will then have fasting labs drawn which will include CBC, Chem 20, HbA1C, urinalysis, microalbumin, LFTs, glucose, insulin, c-peptide, lipids, FFA, CRP, TNFA, IL-6, ICAM, VCAM, endothelin 1, PAI-1 protein, PAI-1 activity, and FOX2. The subjects randomized to Exenatide will then take their morning dose, and all subjects will then have a mixed meal (time 0), and labs will again be drawn at 15, 30 minutes, 45 minutes, 60 minutes, 120 minutes, 180 minutes, and 240 minutes after the meal challenge measuring glucose, insulin, c-peptide, lipids, and FFA. At time 120 minutes, PWA and FMD will be performed again along with labs for CRP, TNFA, IL-6, ICAM, VCAM, endothelin 1, PAI-1 protein, PAI-1 activity, and FOX2. At 240 minutes, PWA, FMD, and TNG will be performed.

Methods The Mixed Meal will consist of standard liquid meal, Boost, which is composed of 61.5g of carbohydrate, 15g of protein, and 6g of fat, in 360ml, with 360 calories. The subjects will come in fasting. Starting at time 0, the Boost will be consumed over a five minute time period. The studies will then be performed on visits 2 and 4.

Brachial artery flow mediated dilatation (FMD) evaluates endothelium-dependent reactivity in the macrocirculation. This is carried out in temperature-controlled room (24-26 degrees C) with a 30 minute acclimatization period. FMD of the brachial artery is measured at rest and during reactive hyperemia using a high-resolution 10.0 MHz linear array transducer and an HDI Ultramark 9 system. Reactive hyperemia is produced by inflating a pneumatic tourniquet distally to the brachial artery to 50 mmHg above the systolic BP for 5 minutes, then deflating it. Brachial artery diameter is measured before inflation of the cuff and 1-2 minutes after cuff deflation and expressed as the percentage change.

Trinitroglycerin-induced vasodilation evaluates endothelium independent vasodilation. The brachial artery will be scanned before and 5 minutes after sublingual administration of 400 ug of trinitroglycerin. This will be performed only at 240 minutes, fifteen minutes after completion of the FMD study to allow for the brachial artery to return to baseline.

Pulse wave analysis(PWA) is another method to evaluate the function of the vasculature. The shape of the arterial pressure waveform provides a measure of systemic arterial stiffness. All measurements will be made in the right arm using the Sphygmocore Px (Atcor Medical Blood Pressure Analysis System, Australia) in a temperature-controlled room. With the wrist slightly extended and supported on a pillow, the radial artery of the right arm is flattened with a high fidelity micro manometer using gentle pressure. 20 sequential waveforms are acquired and the system software generates an average peripheral and corresponding central waveform, which is then subjected to further analysis of augmentation. Two pressure peaks characterize the systolic part of the central waveform. The first peak results from LV ejection, and the second results from the wave reflection. The difference between peaks represents the degree to which central arterial pressure is augmented by wave reflection. AP is the absolute increase in pressure from the reflected wave and AI is a measure of the contribution that the wave reflection makes to the arterial pressure waveform, and is expressed as a percentage of pulse pressure. The amplitude and timing of the reflected wave ultimately depends on the stiffness of the small vessels and large arteries, and thus is a measure of systemic arterial stiffness.

We will enroll 72 subjects to obtain 60 subjects who will complete the study. The subjects will have Type 2 diabetes and will be randomized to one of two treatment arms.