A Randomized Study to Evaluate the Safety, Tolerability and Antiviral Activity of ABT-450, ABT-333 and ABT-072

Study at a glance

From the registry record, last updated by the sponsor on 8 Jan 2015. Recruitment status is as the sponsor reported it: confirm with the study team.

Official title

A Blinded, Randomized, Placebo-controlled, Dose Ranging Study to Evaluate the Safety, Tolerability, Pharmacokinetics, and Antiviral Activity of Multiple Doses of ABT-450 With Ritonavir (ABT-450/r), ABT-333 or ABT-072 Each Administered Alone and in Combination With Peginterferon α-2a and Ribavirin (PegIFN/RBV) in Treatment-Naïve Subjects With Genotype 1 Chronic Hepatitis C Virus (HCV) Infection

ClinicalTrials.gov ID

NCT01074008

Acronym / sponsor ID

Champion2 / M11-602

Conditions

Hepatitis C, HCV, Chronic Hepatitis C Infection, Hepatitis C Genotype 1

Phase

Phase 2

Study type

Interventional

Recruitment status

Completed

Enrolment

74 participants (actual)

Lead sponsor

AbbVie (prior sponsor, Abbott)Industry (pharma, biotech, devices)

Study start

Mar 2010

Primary completion

Jun 2011 (actual)

Study completion

Jan 2012 (actual)

First posted

24 Feb 2010 (estimated)

Results

Posted 8 Jan 2015

Clinical summary

The research question as the sponsor registered it. This describes what the study plans to test, not what it found.

Study design

Primary purpose

Treatment

Allocation

Randomised

Intervention model

Parallel groups

Masking

Double blind (participant, investigator)

Number of arms

9

Who may qualify

Ages

18 to 65 years

Sex

All

Healthy volunteers

Not accepted

Age groups

Adult, Older adult

Eligibility is decided by the study team after screening; this overview does not establish that a patient qualifies. Full inclusion and exclusion criteria.

Interventions

Primary outcome

1. Maximal Change From Baseline in Hepatitis C Virus Ribonucleic Acid (HCV RNA) Levels During ABT-450/r, ABT-333, or ABT-072 Monotherapy Treatment

   Time frame: Prior to dosing on Day 1 to before the morning dose on Day 4

   Plasma HCV RNA levels (reported as log10 IU/mL) were determined for each sample using a real-time reverse transcriptase-polymerase chain reaction (RT-PCR) assay that had a lower limit of detection of 10 IU/mL and a lower limit of quantification of 25 IU/mL. The baseline value was the HCV RNA level before the first dose of study drug on Day 1. The maximal change during monotherapy was the difference from baseline to the lowest log10 HCV RNA level anytime after the first dose of study drug on Day 1 through the last log10 HCV RNA level before the first dose of study drug on Day 4. Data are reported as the mean ± standard deviation.

2. Maximum Plasma Concentration (Cmax) of ABT-450

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-450 using validated analytical methods. The maximum plasma concentration (Cmax; measured in ng/mL) is the highest concentration that a drug achieves in the blood after administration in a dosing interval. The Cmax of ABT-450 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

3. Time to Maximum Plasma Concentration (Tmax) of ABT-450

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-450 using validated analytical methods. The time to maximum plasma concentration (Tmax; measured in hours) is the time it takes for a drug to achieve Cmax. The Tmax of ABT-450 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

4. Area Under the Plasma Concentration-time Curve From 0 to 24 Hours (AUC24) Post-dose of ABT-450

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-450 using validated analytical methods. The area under the plasma concentration-time curve (AUC; measured in ng*hr/mL) is a method of measurement to determine the total exposure of a drug in blood plasma. The AUC24 of ABT-450 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

5. Maximum Plasma Concentration (Cmax) of Ritonavir

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ritonavir using validated analytical methods. The maximum plasma concentration (Cmax; measured in ng/mL) is the highest concentration that a drug achieves in the blood after administration in a dosing interval. The Cmax of ritonavir was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

6. Time to Maximum Plasma Concentration (Tmax) of Ritonavir

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ritonavir using validated analytical methods. The time to maximum plasma concentration (Tmax; measured in hours) is the time it takes for a drug to achieve Cmax. The Tmax of ritonavir was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

7. Area Under the Plasma Concentration-time Curve From 0 to 24 Hours (AUC24) Post-dose of Ritonavir

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ritonavir using validated analytical methods. The area under the plasma concentration-time curve (AUC; measured in ng*hr/mL) is a method of measurement to determine the total exposure of a drug in blood plasma. The AUC24 of ritonavir was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

8. Maximum Plasma Concentration (Cmax) of ABT-072

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-072 using validated analytical methods. The maximum plasma concentration (Cmax; measured in ng/mL) is the highest concentration that a drug achieves in the blood after administration in a dosing interval. The Cmax of ABT-072 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

9. Time to Maximum Plasma Concentration (Tmax) of ABT-072

   Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

   Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-072 using validated analytical methods. The time to maximum plasma concentration (Tmax; measured in hours) is the time it takes for a drug to achieve Cmax. The Tmax of ABT-072 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

10. Area Under the Plasma Concentration-time Curve From 0 to 24 Hours (AUC24) Post-dose of ABT-072

    Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

    Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-072 using validated analytical methods. The area under the plasma concentration-time curve (AUC; measured in ng*hr/mL) is a method of measurement to determine the total exposure of a drug in blood plasma. The AUC24 of ABT-072 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

11. Maximum Plasma Concentration (Cmax) of ABT-333

    Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

    Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-333 using validated analytical methods. The maximum plasma concentration (Cmax; measured in ng/mL) is the highest concentration that a drug achieves in the blood after administration in a dosing interval. The Cmax of ABT-333 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

12. Time to Maximum Plasma Concentration (Tmax) of ABT-333

    Time frame: Immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose)

    Blood samples were collected immediately prior to morning dose (time 0 hours); 2, 4, 8, 12, and 16 hours after the morning dose on Day 1; and prior to dose on Day 2 (24 hours after Day 1 dose). The samples were analyzed for the concentration of ABT-333 using validated analytical methods. The time to maximum plasma concentration (Tmax; measured in hours) is the time it takes for a drug to achieve Cmax. The Tmax of ABT-333 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

13. Area Under the Plasma Concentration-time Curve From 0 to 12 Hours (AUC12) Post-dose of ABT-333

    Time frame: Immediately prior to morning dose (time 0 hours) and at 2, 4, 8, and 12 hours after the morning dose on Day 1

    Blood samples were collected immediately prior to morning dose (time 0 hours) and at 2, 4, 8, and 12 hours after the morning dose on Day 1. The samples were analyzed for the concentration of ABT-333 using validated analytical methods. The area under the plasma concentration-time curve (AUC; measured in ng*hr/mL) is a method of measurement to determine the total exposure of a drug in blood plasma. The AUC12 of ABT-333 was estimated using non-compartmental methods and data are reported as the mean ± standard deviation.

Results and safety

Loading the posted results from ClinicalTrials.gov…

Research links

• Official record on ClinicalTrials.govLast updated by the sponsor 8 Jan 2015.
• Posted resultsParticipant flow, baseline, all outcome measures and adverse events.
• Derived from this study: PubMed 25451053Pilot-Matias T, Tripathi R, Cohen D, Gaultier I, Dekhtyar T, Lu L, Reisch T, Irvin M, Hopkins T, Pithawalla R, Middleton T, Ng T, McDaniel K, Or YS, Menon R, Kempf D, Molla A, Collins C. In vitro and in vivo antiviral activity and resistance profile of the hepatitis C virus NS3/4A protease inhibitor ABT-450. Antimicrob Agents Chemother. 2015 Feb;59(2):988-97. doi: 10.1128/AAC.04227-14. Epub 2014 Dec 1.
• Related InfoLink provided by the sponsor.

Related trials for Hepatitis C

• Not yet recruiting

  Clinical Study to Evaluate the Performance of the INSTI® HCV Antibody Test for CLIA-Waived Use

  HCV Infection

• Not yet recruiting

  Study to Evaluate the Performance of the INSTI® HCV Antibody Test for Point-of-Care Use in Individuals at Risk for HCV Infection or Presenting With Signs or Symptoms of HCV Infection

  HCV Infection

• RecruitingObservational study

  Evaluation of Patients With Liver Disease

  Hepatitis D, Hepatitis C

• Active, not recruitingPhase 4

  People With CHC Who Achieved a Sustained Virological Response Following Therapy With Direct Acting Antiviral Agents

  Diabetes Mellitus, Hepatitis C, Chronic

• RecruitingObservational study

  "Constitution of a Biological Collection to Establish Preclinical Translational Models for the Study of Tumors and Chronic Liver Diseases".

  Chronic Liver Disease and Cirrhosis, Liver Cancer

Referral and contact

AzTrials does not enrol participants or take referrals. Contact the study team or a site listed below; they decide who can take part. This study is not recruiting at the moment.

26 sites in 2 countries: see every site and its status.