Postoperative PainNCT03547505
Incidence of Postoperative Pain After Glide Path Preparation Using Three Different Instruments
A study testing R-Pilot®, ProGlider® and Manual preparation in people with Postoperative Pain, run by Ondokuz Mayıs University at 1 site in Turkey (Türkiye).
Trial summary
Endodontic postoperative pain is described as a sensation of discomfort following the completion of root canal treatment and is experienced by the 25-40% of the patients regardless of pulp and periradicular diseases (1, 2). Read more about this study
- Who is it for?
- Ages 18 to 60 yearsHealthy volunteers can take part
- Conditions the study is for
- Postoperative Pain
- What is being tested?
- R-Pilot®, ProGlider® and Manual preparation
- Type of treatment
- Surgery or procedure
- Could I receive a placebo?
- No, everyone receives an active treatment
- How many people
- 240 participants
- Where
- 1 siteTurkey (Türkiye)
- Study dates
- 1 Jul 2017to 10 May 2018
- Phase
- Interventional
- Are there results?
- None posted in the registry
Key requirements
Who can take part, as listed by the sponsor. Only the study team can confirm whether you are eligible, so take this list to your doctor.
- Ages 18 to 60 years
- All sexes
- Healthy volunteers accepted
- Adult
Who may be able to join
- Patients with no systemic disease or condition
- Patients having a maxillary or mandibular teeth diagnosed with one of the plural and periodontal diseases (asymptomatic irreversible pulpitis, symptomatic irreversible pulpitis, symptomatic apical periodontitis or asymptomatic apical periodontitis)
Who cannot join
- Patients, who were diagnosed with acute or chronic apical abscesses
- Patients showing signs of systemic infection
- Patients with allergies to local anesthetic agents,
- Patients who are taking medication (analgesic, antibiotic or anti-inflammatory drugs) during the 7 days before the procedure
- Patients presenting with multiple teeth requiring treatment or having a progressive periodontal disease
Trial locations and contacts
1 site in 1 country.
About this study
Official title: Comparison of the Incidence of Postoperative Pain After Glide Path Preparation Using Manual, Reciprocating and Continuous Rotary Instruments: A Randomized Clinical Trial
Endodontic postoperative pain is described as a sensation of discomfort following the completion of root canal treatment and is experienced by the 25-40% of the patients regardless of pulp and periradicular diseases (1, 2). Prevalence of pain has been reported to decrease from 40% in the first 48 hours to 11% after 7 days (2). Mechanisms of endodontic postoperative pain is multifactorial and procedural processes such as glide path preparation, establishment of apical patency or root canal instrumentation technique were claimed to influence the posttreatment pain incidence (3-5).
Glide path preparation has been reported to guide the successor instruments and prevent complications of root canal preparation such as taper lock, instrument separation, transportation, and ledge formation (6-8). Several instruments and techniques have been suggested for the preparation of glide path, including hand preparation with stainless steel K-files, the combination of reciprocating handpiece and stainless steel K-files or the use of a less tapered motor-driven nickel-titanium (NiTi) rotary instrument (9-11). The use of NiTi rotary instruments has been associated with a less time-consuming and safe glide path preparation, which respects to the original canal anatomy (9, 10).
The ProGlider (Dentsply Sirona; Ballaigues, Switzerland) is a rotary glide path instrument manufactured from memory NiTi wire, which provides increased fatigue resistance, compared to the conventional NiTi glide path instruments (12). The concept of reciprocation motion was introduced with the expectation of a safer instrumentation with a single file (13). Reciprocation motion has been reported to increase the fatigue resistance of the instrument by exerting to lower stress values compared to the continuous rotation (14). The R-Pilot (VDW; Munich, Germany) instrument introduces the reciprocating motion to the glide path preparation (15). Reciprocating motion has been reported to produce greater amount of apically extruded debris, which was associated with irritation of periradicular tissues and postoperative endodontic pain, compared to continuous motion (16). However, a few clinical trials compared the reciprocation and rotation kinematics regarding their effect on postoperative pain and reported conflicting results, which could be attributed to the use of different instrumentation systems with different mechanical properties and designs (17-19). However, the effect of reciprocating motion during glide path preparation on the postoperative endodontic pain has not been investigated, yet. The purpose of the present study was to evaluate the incidence of postoperative pain after glide path preparation performed with stainless steel K-files, ProGlider or R-Pilot glide path instruments. The null hypothesis tested was that there is no difference in the incidence and severity of postoperative pain following the glide path preparation with any of the 3 instruments.
Read the detailed description
For this study, ethical board approval was given by the local university clinical researches ethical committee (KAEK-357). This study included a total of 240 patients (137 women and 103 men) between the ages of 18 and 60. According to the a priori sample size calculation using G*Power software (G*Power 3.1 for Macintosh, Heinrich-Heine, Düsseldorf, Germany) and the results of a previous study (20) a minimum sample size of 66 would be required based on a type I error of 0.05 and a power of 90% to detect differences among 3 study groups at 6 measurement times. In the present study, 80 patients were assigned to each group. Maxillary and mandibular teeth of healthy patients, who were diagnosed with asymptomatic irreversible pulpitis, symptomatic irreversible pulpitis, symptomatic apical periodontitis or asymptomatic apical periodontitis, were included to the study. Patients, who were diagnosed with acute or chronic apical abscesses, showing signs of systemic infection, having allergies to local anesthetic agents, taking medication (analgesic, antibiotic or anti-inflammatory drugs) during the 7 days before the procedure, presenting with multiple teeth requiring treatment or having a progressive periodontal disease, were excluded from the study (Fig. 1). All participants were informed about the study and had signed the written informed consent prior to treatment.
Pulp vitality was tested using thermal and electric pulp tests (Parkell, NY, USA) and confirmed and recorded after access cavity preparation according to the presence of bleeding. Periapical radiographs were taken using phosphor plates and digital radiologic system (Sirona Vario DG, Bensheim, Germany) and achieved. Clinical and radiological data were recorded on each patient's sheet and analyzed by 2 blinded examiners who were experienced endodontists. In case of conflict a third opinion was taken from another endodontist. The examiners were previously calibrated by a case series evaluation and consensus between examiners was analyzed by Kappa test, until interexaminer reliability between 0.90-1.00 was expected. Baseline demographic and clinical features of each patient (pulp vitality, tooth type, presence and level of preoperative pain) were registered (Table 1).
The subjects were treated by 4 endodontists between July 2017 and April 2018. Prior to treatment the patients were instructed how to complete a visual analogue scale (VAS) to determine their pain scores. The VAS included a 10 cm straight horizontal line numbered at each centimetre from 0 to 10. Local anesthesia using 4% articaine with adrenaline 1:100.000 was performed to all patients. In case of requirement another carpule of 4% articaine was used. Following preparation of access cavity each patient was randomly assigned to 1 of the 3 experimental groups by choosing a closed envelope, which was written the group name.
In manual glide path group, glide path creation was performed with stainless steel #08, 10, 15 K-files used with "push and pull" which was described in a previous study (21). Instruments were used with a motion, which the instrument proceeds apically quarterly to the point of resistance then pulled out for debris removal. The procedure was repeated with each file until the working length (WL) was achieved and confirmed with electronic apex locator (Root ZX Mini, Morita Corp., Kyoto, Japan).
In ProGlider group, #08 stainless steel files were used to measure WL with electronic apex locator (Morita Corp., Kyoto, Japan). ProGlider instrument was operated by an endodontic motor (X-Smart, Dentsply Sirona, Ballaigues, Switzerland) with 16:1 contra angle at the suggested settings (300 rpm on display, 5 Ncm) at the measured WL.
In R-Pilot group, #08 stainless steel files were used to measure WL with electronic apex locator (Morita Corp., Kyoto, Japan). R-Pilot instrument was operated by an endomotor (VDW Silver, Munich, Germany) at "Reciproc All" setting at the measured WL.
After glide path creation, further endodontic procedures were standardized. The root canals were prepared up to X3 instrument of ProTaper Next (Dentsply Sirona) rotary instrumentation system. In case of requirement root canals were enlarged up to X4 or X5 instrument of ProTaper Next. Irrigation was performed with 5.25% NaOCl delivered with 30-G needle syringe for 10 mL for each root canal. Following preparation each root canal was flushed with 2.5 mL of 17% EDTA for 1 minute, 2.5 mL distilled water and 2.5 mL of 5.25% NaOCl, respectively as final irrigation. Root canals were dried with sterile paper points and obturated by cold lateral compaction technique using epoxy resin sealer and gutta-percha. Access cavities were restored with temporary glass ionomer filling (Riva Light Cure, Southern Dental Industries-SDI, Australia). Then the patients were discharged with VAS forms. The patients were contacted each day for 3 days for the record of their VAS score at the post operative 6th, 12th, 18th, 24th, 48th, and 72nd hours and any possible analgesic intake.
Distribution of age, gender, tooth type, presence/absence of preoperative pain and pulp vitality among the experimental groups were tested using chi-square test whereas the level of preoperative pain scores at each group was compared using one-way analysis of variance test. Kolmogorov-Smirnov test was performed to test the distribution of VAS score data and comparisons among the preparation groups regarding the severity of postoperative pain were measured by one-way analysis of variance and post-hoc Tukey tests for each measurement interval. A logistic regression analysis was performed to determine the categorical variables such as group, age (categorized according to decades), gender, tooth type (incisor, premolar, molar), presence of preoperative pain and pulp vitality that best correlated with postoperative pain incidence. All statistical analyses were performed using SPSS software (v.18.0; IBM Corp., Chicago, IL, USA) with a level of significance set at 0.05.
- Conditions
- Postoperative Pain
- Being tested
- R-Pilot®, ProGlider®, Manual preparation
- Keywords
- Glide path, postoperative pain, R-Pilot, ProGlider
- Medical subject headings
- Pain, Postoperative
What participants receive
What participants receive. In a randomised study each person is assigned to one group by chance.
R-Pilot®Procedure or surgery
Also called Glide path preparation, Reciprocating glide path instrument, R-Pilot, VDW, Munich, Germany
Glide path preparation using R-Pilot® in reciprocating manner.
ProGlider®Procedure or surgery
Also called Rotating glide path instrument, ProGlider, Dentsply Sirona, Ballaigues, Switzerland
Glide path preparation using ProGlider® in a rotating manner.
Manual preparationProcedure or surgery
Also called Glide path creation with stainless steel hand files, K-files, Dentsply Sirona, Switzerland
Glide path preparation using manual K-files numbered from 08 to 15.
| Study group | Role | What they receive |
|---|---|---|
| R-Pilot® | Experimental | R-Pilot® was operated by an endomotor (VDW Silver, Munich, Germany) at "Reciproc All" setting. Receives: Procedure: R-Pilot® |
| ProGlider® | Experimental | ProGlider® was operated by an endodontic motor (X-Smart, Dentsply Sirona, Ballaigues, Switzerland) with 16:1 contra angle at the suggested settings (300 rpm on display, 5 Ncm). Receives: Procedure: ProGlider® |
| Manual preparation | Experimental | In the manual glide path group, glide path creation was performed with stainless steel #08, 10, 15 K-files used with "push and pull" motion. Instruments were used with a motion in which the instrument proceeds apically quarterly to the point of resistance, then is pulled out for debris removal. The procedure was repeated with each file until the working length was achieved and confirmed with an electronic apex locator (Root ZX Mini, Morita Corp., Kyoto, Japan). Receives: Procedure: Manual preparation |
What is being measured
The primary outcome is the main question the study is designed to answer.
Postoperative Pain Scores using Visual Analogue Scale (VAS)
VAS is a measure of pain intensity. In the present study, the VAS included a 10 cm straight horizontal line numbered at each centimetre from 0 to 10 showing two extreme symptoms of pain. "0" means no pain and "10" means the worst pain the subject has ever experienced. Each centimeter represents the pain intensity that the subject will mark orientated from 0 to 10. The intensity is increased from 0 to 10, therefore a higher score means a higher pain intensity. There are no subscales.
Measured: 72 hours
Timeline
From the start of the study to its completion; the mark is today. Estimated dates are the sponsor’s plan.
- First posted6 Jun 2018
- Study start1 Jul 2017
- Primary completion30 Apr 2018
- Study completion10 May 2018
Resources
- Official record on ClinicalTrials.govThe registry entry this page is built from, with its full change history.
- Other trials for Postoperative PainStudies of the same condition, open and under way.
- More trials run by Ondokuz Mayıs UniversityThe sponsor's other registered studies.
- What the trial phases meanHow a treatment moves from first tests in people to approval.
More details
For doctors and researchers: how the study is designed, who runs it, and its registry IDs.
Study design
- Study type
- Interventional
- Phase
- Phase N/A
- Primary purpose
- Treatment
- Allocation
- Randomised
- Intervention model
- Parallel groups
- Model description
- Randomized controlled clinical trial
- Masking
- Single blind
- Who is masked
- Investigator
- Enrolment
- 240 participants (actual)
Sponsor and investigators
- Lead sponsor
- Ondokuz Mayıs University
- Sponsor type
- University, hospital or other
- Responsible party
- Principal investigator, Cangül Keskin, Ondokuz Mayıs University
IDs, dates and publications
- ClinicalTrials.gov ID
- NCT03547505
- Sponsor's protocol ID
- KAEK-357
- Status last verified
- May 2018
- First submitted
- 11 May 2018
- Last updated
- 6 Jun 2018
- Results posted
- No
- Data monitoring committee
- No
- FDA-regulated drug
- No
- FDA-regulated device
- No
- Individual data sharing
- No
Study at a glance
From the registry record, last updated by the sponsor on 6 Jun 2018. Recruitment status is as the sponsor reported it: confirm with the study team.
- Official title
- Comparison of the Incidence of Postoperative Pain After Glide Path Preparation Using Manual, Reciprocating and Continuous Rotary Instruments: A Randomized Clinical Trial
- ClinicalTrials.gov ID
- NCT03547505
- Acronym / sponsor ID
- KAEK-357
- Conditions
- Postoperative Pain
- Keywords
- Glide path, postoperative pain, R-Pilot, ProGlider
- Study type
- Interventional
- Recruitment status
- Completed
- Enrolment
- 240 participants (actual)
- Lead sponsor
- Ondokuz Mayıs UniversityUniversity, hospital or other
- Study start
- 1 Jul 2017 (actual)
- Primary completion
- 30 Apr 2018 (actual)
- Study completion
- 10 May 2018 (actual)
- First posted
- 6 Jun 2018 (actual)
- Results
- Not posted in the source record
Clinical summary
The research question as the sponsor registered it. This describes what the study plans to test, not what it found.
Endodontic postoperative pain is described as a sensation of discomfort following the completion of root canal treatment and is experienced by the 25-40% of the patients regardless of pulp and periradicular diseases (1, 2). Prevalence of pain has been reported to decrease from 40% in the first 48 hours to 11% after 7 days (2). Mechanisms of endodontic postoperative pain is multifactorial and procedural processes such as glide path preparation, establishment of apical patency or root canal instrumentation technique were claimed to influence the posttreatment pain incidence (3-5).
Glide path preparation has been reported to guide the successor instruments and prevent complications of root canal preparation such as taper lock, instrument separation, transportation, and ledge formation (6-8). Several instruments and techniques have been suggested for the preparation of glide path, including hand preparation with stainless steel K-files, the combination of reciprocating handpiece and stainless steel K-files or the use of a less tapered motor-driven nickel-titanium (NiTi) rotary instrument (9-11). The use of NiTi rotary instruments has been associated with a less time-consuming and safe glide path preparation, which respects to the original canal anatomy (9, 10).
The ProGlider (Dentsply Sirona; Ballaigues, Switzerland) is a rotary glide path instrument manufactured from memory NiTi wire, which provides increased fatigue resistance, compared to the conventional NiTi glide path instruments (12). The concept of reciprocation motion was introduced with the expectation of a safer instrumentation with a single file (13). Reciprocation motion has been reported to increase the fatigue resistance of the instrument by exerting to lower stress values compared to the continuous rotation (14). The R-Pilot (VDW; Munich, Germany) instrument introduces the reciprocating motion to the glide path preparation (15). Reciprocating motion has been reported to produce greater amount of apically extruded debris, which was associated with irritation of periradicular tissues and postoperative endodontic pain, compared to continuous motion (16). However, a few clinical trials compared the reciprocation and rotation kinematics regarding their effect on postoperative pain and reported conflicting results, which could be attributed to the use of different instrumentation systems with different mechanical properties and designs (17-19). However, the effect of reciprocating motion during glide path preparation on the postoperative endodontic pain has not been investigated, yet. The purpose of the present study was to evaluate the incidence of postoperative pain after glide path preparation performed with stainless steel K-files, ProGlider or R-Pilot glide path instruments. The null hypothesis tested was that there is no difference in the incidence and severity of postoperative pain following the glide path preparation with any of the 3 instruments.
Detailed description
For this study, ethical board approval was given by the local university clinical researches ethical committee (KAEK-357). This study included a total of 240 patients (137 women and 103 men) between the ages of 18 and 60. According to the a priori sample size calculation using G*Power software (G*Power 3.1 for Macintosh, Heinrich-Heine, Düsseldorf, Germany) and the results of a previous study (20) a minimum sample size of 66 would be required based on a type I error of 0.05 and a power of 90% to detect differences among 3 study groups at 6 measurement times. In the present study, 80 patients were assigned to each group. Maxillary and mandibular teeth of healthy patients, who were diagnosed with asymptomatic irreversible pulpitis, symptomatic irreversible pulpitis, symptomatic apical periodontitis or asymptomatic apical periodontitis, were included to the study. Patients, who were diagnosed with acute or chronic apical abscesses, showing signs of systemic infection, having allergies to local anesthetic agents, taking medication (analgesic, antibiotic or anti-inflammatory drugs) during the 7 days before the procedure, presenting with multiple teeth requiring treatment or having a progressive periodontal disease, were excluded from the study (Fig. 1). All participants were informed about the study and had signed the written informed consent prior to treatment.
Pulp vitality was tested using thermal and electric pulp tests (Parkell, NY, USA) and confirmed and recorded after access cavity preparation according to the presence of bleeding. Periapical radiographs were taken using phosphor plates and digital radiologic system (Sirona Vario DG, Bensheim, Germany) and achieved. Clinical and radiological data were recorded on each patient's sheet and analyzed by 2 blinded examiners who were experienced endodontists. In case of conflict a third opinion was taken from another endodontist. The examiners were previously calibrated by a case series evaluation and consensus between examiners was analyzed by Kappa test, until interexaminer reliability between 0.90-1.00 was expected. Baseline demographic and clinical features of each patient (pulp vitality, tooth type, presence and level of preoperative pain) were registered (Table 1).
The subjects were treated by 4 endodontists between July 2017 and April 2018. Prior to treatment the patients were instructed how to complete a visual analogue scale (VAS) to determine their pain scores. The VAS included a 10 cm straight horizontal line numbered at each centimetre from 0 to 10. Local anesthesia using 4% articaine with adrenaline 1:100.000 was performed to all patients. In case of requirement another carpule of 4% articaine was used. Following preparation of access cavity each patient was randomly assigned to 1 of the 3 experimental groups by choosing a closed envelope, which was written the group name.
In manual glide path group, glide path creation was performed with stainless steel #08, 10, 15 K-files used with "push and pull" which was described in a previous study (21). Instruments were used with a motion, which the instrument proceeds apically quarterly to the point of resistance then pulled out for debris removal. The procedure was repeated with each file until the working length (WL) was achieved and confirmed with electronic apex locator (Root ZX Mini, Morita Corp., Kyoto, Japan).
In ProGlider group, #08 stainless steel files were used to measure WL with electronic apex locator (Morita Corp., Kyoto, Japan). ProGlider instrument was operated by an endodontic motor (X-Smart, Dentsply Sirona, Ballaigues, Switzerland) with 16:1 contra angle at the suggested settings (300 rpm on display, 5 Ncm) at the measured WL.
In R-Pilot group, #08 stainless steel files were used to measure WL with electronic apex locator (Morita Corp., Kyoto, Japan). R-Pilot instrument was operated by an endomotor (VDW Silver, Munich, Germany) at "Reciproc All" setting at the measured WL.
After glide path creation, further endodontic procedures were standardized. The root canals were prepared up to X3 instrument of ProTaper Next (Dentsply Sirona) rotary instrumentation system. In case of requirement root canals were enlarged up to X4 or X5 instrument of ProTaper Next. Irrigation was performed with 5.25% NaOCl delivered with 30-G needle syringe for 10 mL for each root canal. Following preparation each root canal was flushed with 2.5 mL of 17% EDTA for 1 minute, 2.5 mL distilled water and 2.5 mL of 5.25% NaOCl, respectively as final irrigation. Root canals were dried with sterile paper points and obturated by cold lateral compaction technique using epoxy resin sealer and gutta-percha. Access cavities were restored with temporary glass ionomer filling (Riva Light Cure, Southern Dental Industries-SDI, Australia). Then the patients were discharged with VAS forms. The patients were contacted each day for 3 days for the record of their VAS score at the post operative 6th, 12th, 18th, 24th, 48th, and 72nd hours and any possible analgesic intake.
Distribution of age, gender, tooth type, presence/absence of preoperative pain and pulp vitality among the experimental groups were tested using chi-square test whereas the level of preoperative pain scores at each group was compared using one-way analysis of variance test. Kolmogorov-Smirnov test was performed to test the distribution of VAS score data and comparisons among the preparation groups regarding the severity of postoperative pain were measured by one-way analysis of variance and post-hoc Tukey tests for each measurement interval. A logistic regression analysis was performed to determine the categorical variables such as group, age (categorized according to decades), gender, tooth type (incisor, premolar, molar), presence of preoperative pain and pulp vitality that best correlated with postoperative pain incidence. All statistical analyses were performed using SPSS software (v.18.0; IBM Corp., Chicago, IL, USA) with a level of significance set at 0.05.
Study design
- Primary purpose
- Treatment
- Allocation
- Randomised
- Intervention model
- Parallel groups
- Masking
- Single blind (investigator)
- Number of arms
- 3
- Model description
- Randomized controlled clinical trial
| Arm | Type | Receives |
|---|---|---|
| R-Pilot® | Experimental | Procedure: R-Pilot®R-Pilot® was operated by an endomotor (VDW Silver, Munich, Germany) at "Reciproc All" setting. |
| ProGlider® | Experimental | Procedure: ProGlider®ProGlider® was operated by an endodontic motor (X-Smart, Dentsply Sirona, Ballaigues, Switzerland) with 16:1 contra angle at the suggested settings (300 rpm on display, 5 Ncm). |
| Manual preparation | Experimental | Procedure: Manual preparationIn the manual glide path group, glide path creation was performed with stainless steel #08, 10, 15 K-files used with "push and pull" motion. Instruments were used with a motion in which the instrument proceeds apically quarterly to the point of resistance, then is pulled out for debris removal. The procedure was repeated with each file until the working length was achieved and confirmed with an electronic apex locator (Root ZX Mini, Morita Corp., Kyoto, Japan). |
Who may qualify
- Ages
- 18 to 60 years
- Sex
- All
- Healthy volunteers
- Accepted
- Age groups
- Adult
Key inclusion criteria (2 listed)
- Patients with no systemic disease or condition
- Patients having a maxillary or mandibular teeth diagnosed with one of the plural and periodontal diseases (asymptomatic irreversible pulpitis, symptomatic irreversible pulpitis, symptomatic apical periodontitis or asymptomatic apical periodontitis)
Key exclusion criteria (5 listed)
- Patients, who were diagnosed with acute or chronic apical abscesses
- Patients showing signs of systemic infection
- Patients with allergies to local anesthetic agents,
- Patients who are taking medication (analgesic, antibiotic or anti-inflammatory drugs) during the 7 days before the procedure
- Patients presenting with multiple teeth requiring treatment or having a progressive periodontal disease
Eligibility is decided by the study team after screening; this overview does not establish that a patient qualifies. Full inclusion and exclusion criteria.
Interventions
| Intervention | Type | Arms |
|---|---|---|
| R-Pilot®Also: Glide path preparation, Reciprocating glide path instrument, R-Pilot, VDW, Munich, GermanyGlide path preparation using R-Pilot® in reciprocating manner. | Procedure or surgery | R-Pilot® |
| ProGlider®Also: Rotating glide path instrument, ProGlider, Dentsply Sirona, Ballaigues, SwitzerlandGlide path preparation using ProGlider® in a rotating manner. | Procedure or surgery | ProGlider® |
| Manual preparationAlso: Glide path creation with stainless steel hand files, K-files, Dentsply Sirona, SwitzerlandGlide path preparation using manual K-files numbered from 08 to 15. | Procedure or surgery | Manual preparation |
Primary outcome
Postoperative Pain Scores using Visual Analogue Scale (VAS)
Time frame: 72 hours
VAS is a measure of pain intensity. In the present study, the VAS included a 10 cm straight horizontal line numbered at each centimetre from 0 to 10 showing two extreme symptoms of pain. "0" means no pain and "10" means the worst pain the subject has ever experienced. Each centimeter represents the pain intensity that the subject will mark orientated from 0 to 10. The intensity is increased from 0 to 10, therefore a higher score means a higher pain intensity. There are no subscales.
Results and safety
The study is completed, but results are not available in the source record. That does not mean the treatment did or did not work.
Research links
- Official record on ClinicalTrials.govLast updated by the sponsor 6 Jun 2018.
- Individual participant dataSharing planned: No
Related trials for Postoperative Pain
RecruitingPhase 4
ESP Blocks for Posterior Spinal Fusion
Postoperative Pain
Recruiting
Effect of Cryotherapeutic and Nanotherapeutic Sodium Hypochlorite on Post-Operative Endodontic Pain.
Symptomatic Irreversible Pulpitis, Symptomatic Apical Periodontitis
RecruitingPhase 2
REctus Sheath Trial
Acute Pain, Postoperative Pain, Acute
Not yet recruiting
Effect of Pectoral Nerve Block (PECS) Using Magnesium Sulfate Added to Dexamethasone on Quality of Recovery and Chronic Post-Mastectomy Pain
Breast Cancer, Postoperative Pain
Active, not recruitingPhase 4
Effect of Dexmedetomidine on Postoperative Pain in Spinal Anesthesia for Cesarean Section at Assuit University Hospital
Cesarean Section
Referral and contact
AzTrials does not enrol participants or take referrals. Contact the study team or a site listed below; they decide who can take part. This study is not recruiting at the moment.
The record lists no contact. Use the official record to reach the sponsor.
1 site in 1 country: see every site and its status.
Questions about this trial
What is this clinical trial studying?
A study testing R-Pilot®, ProGlider® and Manual preparation in people with Postoperative Pain, run by Ondokuz Mayıs University at 1 site in Turkey (Türkiye).
The full registered description is in the About this study section and the official record.
Who may be eligible to take part?
The sponsor lists 2 inclusion and 5 exclusion criteria. Eligibility is decided by the study team after screening, so read the full criteria and contact a listed site.
Is this clinical trial currently recruiting?
The record says: finished, as of the sponsor's last update on 6 Jun 2018. Status can change between updates, so confirm with the study contact before making plans.
Where is the study taking place?
The record lists 1 site in Turkey (Türkiye). Whether a site is taking part right now should be confirmed with that site. See every site.
What are the possible benefits and risks?
They depend on the study and the treatment, and no study can promise a benefit. The study team explains the known risks during informed consent, before anyone joins; the record itself does not list them.
Are results available for this study?
The study is completed, but results are not available in the source record. That does not mean the treatment did or did not work.
How can a doctor refer a patient or contact the research team?
The record lists no contact. The official record names the sponsor, who can be asked directly. AzTrials does not enrol participants or take referrals.
What does the primary outcome measure?
Postoperative Pain Scores using Visual Analogue Scale (VAS) (time frame: 72 hours). It is what the study was designed to measure, not a finding.
Where can I read the original study information?
Does a listing mean the treatment is approved or proven to work?
No. A listing means the study is registered. It does not show that the treatment is safe, works, or is approved by a regulator.
How often is this information updated?
AzTrials copies changed records from ClinicalTrials.gov every night and reloads the whole registry every week. The sponsor last updated this record on 6 Jun 2018.