Predictors of Adverse Left Ventricular Remodeling and Final Infarct Size After Primary Percutaneous Coronary Intervention for ST Elevation Myocardial Infarction: A Strain Analysis Study Using Echocardiography and Feature Tracking Cardiac Magnetic Resonance

The study will enroll 100 consecutive patients with acute STEMI presenting to Aswan Heart Centre catheterization-lab for primary PCI matching the selection criteria. Diagnosis of STEMI will be based upon:

Sustained ST-segment elevation of at least 1 mm in at least 2 contiguous leads or new/presumably new left bundle branch block, plus

• Typical anginal pain
• or diagnostic levels of serum cardiac biomarkers
• or imaging evidence of new loss of viable myocardium or new regional wall motion abnormality.

The study patients will undergo primary PCI according to the recent practice guidelines and the local hospital policy in managing ST elevation MI patients. Echocardiography and CMR will be performed twice: within 48 hours of admission and 3 months following the index event.

Management

• Twelve-lead electrocardiogram will be recorded at baseline and 30-min post-procedure. The ST-segment changes will be evaluated in the single lead with the most prominent ST-segment elevation before intervention. The ST-segment elevation will be measured to the nearest 0.5 mm at 60 ms after the J point. Significant ST segment resolution (STR) is defined as a reduction in ST-segment elevation of 50% after 30 min of infarct artery recanalization .
• Immediately before the procedure, patients will receive aspirin (300 mg), clopidogrel (600 mg), or ticagrelor (180 mg). Adjunctive pharmacological treatment during the procedure will include:

1. Unfractionated heparin as an initial bolus of 70 U/kg and additional boluses during the procedure to achieve an activated clotting time of 250 to 350 s (200 to 250 s if Glycoprotein IIb/IIIa (GPIIb/IIIa) antagonist is used). Heparin will be discontinued at the end of percutaneous coronary intervention.
2. The use of a GPIIb/IIIa antagonist during the procedure, primary PCI technique, indications, and methods of thrombectomy if indicated will be done under the regulations of the local hospital policy and the most recent practice guidelines.

The following data will be collected:

1. Clinical data: These include age, gender, weight, height, body mass index, body surface area, smoking status, history of hypertension or diabetes mellitus, dyslipidemia, prior history of coronary artery disease (CAD), and previous coronary interventions. Times from onset of pain to first medical contact, to definitive diagnosis, to needle and to restoration of coronary flow will be recorded as well.
2. Laboratory work up: Complete blood count, INR, cardiac biomarkers (total CK, CK-MB, troponin), Brain natriuretic peptide (BNP), soluble suppression of tumorigenicity 2 (sST2), liver enzymes (ALT and AST), urea and creatinine, and serum electrolytes (Na, K).
3. Angiographic data:

• The thrombolysis in myocardial infarction (TIMI) flow grade:

TIMI flow grade will be assessed at three different time points; immediately after the diagnostic coronary angiography, after wiring the culprit vessel and at the end of the procedure.

• TIMI 0 flow: refers to the absence of any antegrade flow beyond a coronary occlusion.
• TIMI 1 flow: refers to faint antegrade coronary flow beyond the occlusion, with incomplete filling of the distal coronary bed.
• TIMI 2 flow: refers to delayed or sluggish antegrade flow with complete filling of the distal territory.
• TIMI 3 flow: refers to normal antegrade flow with complete filling of the distal territory.
• The myocardial blush grade (MBG): Myocardial blush grade evaluates contrast density in the myocardial region of the infarct-related artery compared to regions of non-infarct-related arteries on coronary angiography. It will be reported at the end of the procedure.
• MBG 0: no myocardial blush.
• MBG 1: minimal myocardial blush or contrast density.
• MBG 2: moderate blush or contrast density, but less than a contralateral or ipsilateral non infarct-related artery.
• MBG 3: normal myocardial blush or contrast density similar to a contralateral or ipsilateral non infarct-related artery.

When myocardial blush persisted ("staining"), this phenomenon suggested leakage of the contrast medium into the extravascular space, and will be graded 0 Angiographic incomplete reperfusion is defined as TIMI flow grade < 2 or MBG < 2.

Echocardiography protocol:

Patients will undergo transthoracic echocardiography using xMATRIX X5-1 phased array sector probe (1 - 5 MHz) of the Philips iE33 xMATRIX and EPIQ 7 machines (Philips Medical Systems, Andover, MA, USA). The blood pressure and heart rate during the study will be recorded.

1. Conventional echocardiography: Standard views will be obtained and analyzed in accordance with the American Society of Echocardiography guidelines. . The following variables will be noted:
2. Left ventricular ejection fraction: calculated by the modified Simpson's rule by tracing the endocardial border at end-diastole and end-systole in the two-chamber and four-chamber views.
3. Left ventricular end-diastolic and end-systolic volumes (LVEDV and LVESV): absolute values and indexed to body surface area.
4. Assessment of regional wall motion abnormalities: wall motion scores for the seventeen myocardial segments and wall motion score index.
5. Pulsed Doppler mitral inflow: E and A wave velocities, and E/A ratio.
6. Lateral and medial mitral annular tissue Doppler E', A', and S' wave velocities, lateral and medial E/E' ratios.
7. Left atrial volume: absolute and indexed to body surface area.
8. 2D Speckle tracking echocardiography (STE) of the left ventricle:
9. Image acquisition: Images will be acquired using the same probe for conventional echocardiography of the Philips machine. Digital loops will be acquired from basal, mid, and apical parasternal short axis views, and apical long-axis, two-chamber and four-chamber views. Frame rates have to be higher than fifty frames per second.
10. Strain analysis: The digitally stored clips will be analyzed offline using TomTec software. For each of the three apical views, the operator manually identifies three points: two on each side of the mitral valve, and a third at the apex of the left ventricle (LV). The software automatically detects the endocardium at end-systole and tracks myocardial motion during the entire cardiac cycle. The software automatically calculates the peak longitudinal and circumferential strain for each individual segment in a seventeen-segment left ventricle model, expressed as bull's eye, and calculates global longitudinal / circumferential strain by averaging local strains along the entire left ventricle. The software provides the strain curves for the 16 myocardial segments (excluding the apical cap). Using a similar process for the short axis views, the software automatically detects the endocardium and generates peak radial strain for each myocardial segment.
11. 3D Speckle tracking echocardiography (STE) of the left ventricle:
12. Image acquisition:

• Three-dimensional echocardiography Images will be acquired using the same probe of the Philips machine for conventional echocardiography. Images will be acquired from the apical window, taking care to include the entire LV cavity within the pyramidal scan volume. The dataset will be acquired over 4 consecutive cardiac cycles during a short breath-hold to avoid stitching artifacts.

1. Strain analysis:

• Offline analysis of global and regional longitudinal, circumferential, and radial strain will be performed using TomTec software.

Cardiac Magnetic Resonance protocol:

Studies will be performed on a 1.5 T unit (AERA [Siemens Medical System, Erlangen, Germany]) using electrocardiographic triggering and a cardiac-dedicated phase-array coil. For the assessment of LV volumes and function, steady-state free precession breath-held cine images (bSSFP) will be acquired in the following orientations: vertical long axis, horizontal long axis and short axis. Standard parameters are: repetition time/echo time 3.6/1.8 ms; flip angle 50-70°; slice thickness 6 mm; matrix 160 × 256; field of view 350-400 mm; and temporal resolution 25 msec. The set of short axis images will encompass the left ventricle entirely, with a between slices gap of 2 mm. For delayed enhancement imaging, a dose of 0.15 mL of gadolinium per kilogram of body weight will be administered and images will be acquired 10 minutes after contrast injection. The sequence used will be a segmented inversion recovery gradient-echo pulse sequence using the same image orientations as the cine images. Scan parameters are: TR/TE 4.01/1.25 ms, flip angle 15°, matrix 208 x256, and voxel size 1.6 x 1.3x5 mm3. T1 is adjusted to achieve optimal nulling of myocardial signal.

All images will be analyzed offline using Philips IntelliSpace Portal V8.0 workstation (Philips Healthcare, Best, The Netherlands) for analysis of LV volumes, function, and infarct size.

Feature tracking strain analysis:

This will be performed offline using Segment Medviso software that estimates myocardial strain curves by computing inter-frame deformation fields using a tracking strategy based on non-rigid image registration. Instead of myocardial boundaries tracking only, the method uses the entire image content (i.e. blood pool and entire myocardium) during the optimization process. Circumferential and radial LV myocardial Lagrangian strain are evaluated on short-axis cine SSFP images; longitudinal Lagrangian strain is derived from vertical long-axis ones. First, both endo- and epicardial contours are manually drawn at end diastole in the long and short-axis. Contours are propagated automatically by the software throughout the cardiac cycle generating myocardial strain and strain rate curves, with both global and regional values.28

Infarct size:

This will be determined using the full width at half maximum (FWHM) technique, which uses half the maximal signal within the scar as the threshold. The total final infarct area is expressed as percentage of the LV volume, given by the sum of the volume of hyperenhancement on delayed contrast enhanced images (necrosis/scar) for all slices divided by the sum of the LV myocardial cross-sectional volumes (%LV).

LV volumes, function, and strain analysis will be performed in both the baseline and follow-up CMR study; the final infarct size will be calculated from the follow-up study.

A second follow-up visit will be scheduled at 6 months of the index event to collect the following data on clinical outcome:

1. Mortality (all-cause and cardiac)
2. Recurrent angina assessed by Canadian Cardiovascular Society (CCS) grading.
3. Re-infarction.
4. Target lesion revascularization (TLR): either repeat percutaneous or surgical revascularization for a lesion anywhere within the stent or the 5-mm borders proximal or distal to the stent.
5. Target vessel revascularization (TVR): Revascularization of the same vessel of the primary event either surgical or percutaneous other than TLR definition.
6. Re-hospitalization for heart failure. Data on compliance to medications will be reported as well. A written informed consent will be obtained from all patient