Clinical trials: 3d Printing
ACL, ACL Injury
Playmaker 3D Printed Knee Extender
The purpose of this study is to explore the development of, and patient outcomes associated with, the use of individually printed knee extender in conjunction with a video-based home pre-habilitation program for patients who have…
- Trial name
- NCT05878652
- Testing
- 3D printed knee extender device, Standard Prehabilitation Education
- Where
- 2 sites in United States
- Volunteers
- 36 people
- Sponsor
- Sanford Health
Cleft Lip and Palate
Use of Computer Aided Design and 3D Printing for Anesthesiology Management in a Pediatric Patient With Cleft Facial Defect (3D Obturator) - Pilot Trial
Congenital malformations of the orofacial area are the most common congenital malformations in children with an incidence of 1.8 children with orofacial cleft per 1000 healthy births in the Czech Republic.
- Trial name
- Pilobtur (NCT04422964)
- Testing
- 3D Obturator
- Where
- Czechia
- Volunteers
- 40 people
- Sponsor
- Brno University Hospital
Double Outlet Right Ventricle, Transposition of the Great Arteries
Clinical Impact of Rapid Prototyping 3D Models for Surgical Management
Patient-specific, 3D printed models have been utilized in preoperative planning for many years. Among researchers and clinicians, there is a perception that preoperative exposure to 3D printed models, derived from patient images…
- Conditions
- Double Outlet Right Ventricle, Transposition of the Great Arteries, Truncus Arteriosus, Congenitally Corrected Transposition of the Great Arteries
- Trial name
- NCT04788082
- Testing
- 3D Printed Heart Model
- Where
- 3 sites in United States
- Sponsor
- Children's National Research Institute
Ankle Injuries
Application of 3D Printing Technology in Subtalar Arthrodesis
This study aims to use 3D printing personalized plate to locate the position in which the K-wires would be drilled to save operation time and decrease the number of times that the K-wires are drilled.
- Trial name
- NCT03152916
- Testing
- 3d printing personalized plate
- Where
- China
- Volunteers
- 10 people
- Sponsor
- Southwest Hospital, China
Airway Disease, Fistula Bronchial
Airway Stent Modified With 3D Printing for Gastro-respiratory Fistula Involving Carina and Distal Bronchi
In this study, the investigators used the covered metallic segmented airway stent modified with 3D printing to treat gastro-respiratory fistula involving carina and distal bronchi and aimed to determine the feasibility, efficacy…
- Conditions
- Airway Disease, Fistula Bronchial, Fistula, Gastric
- Trial name
- NCT03890523
- Testing
- Airway stent implantation
- Where
- 2 sites in China
- Volunteers
- 100 people
- Sponsor
- Ruijin Hospital
Stricture; Trachea, Malignant Neoplasm
Airway Segmented Stent Modified With 3D Printing for Malignant Stricture Involving Carina and Distal Bronchi
In this study, we used the covered metallic segmented airway stent to treat malignant strictures involving carina and bronchi distal to carina and aimed to determine the feasibility, efficacy and safety of this technique.
- Trial name
- NCT03890575
- Testing
- Airway stent implantation
- Where
- 2 sites in China
- Volunteers
- 100 people
- Sponsor
- Ruijin Hospital
Flexor Tendon Injury, Tendon Injury - Hand
Effects of Different Wrist Positions in Dorsal Blocking Orthoses After Flexor Tendon Repair
This randomized controlled study aims to compare the effects of three different wrist positions (30° extension, neutral, and 30° flexion) used in dorsal blocking orthoses during early active mobilization after zone I-II flexor…
- Trial name
- NCT07489235
- Testing
- 3D-Printed Dorsal Blocking Orthosis (wrist 30 degree extension), 3D-Printed Dorsal Blocking Orthosis (wrist neutral), 3D-Printed Dorsal Blocking Orthosis (wrist 30 degree flexion)
- Where
- Turkey (Türkiye)
- Volunteers
- 64 people
- Sponsor
- Sedanur Güngör
Medulloblastoma Tumor
Evaluation of The Radioprotective Effect of 3D-Printed Intraoral Stents in Children With Brain Cancer.
Brain cancer patients undergoing radiotherapy may experience oral complications such as oral mucositis, gingival inflammation, plaque accumulation, radiation-induced caries, and reduced oral-health-related quality of life due to…
- Trial name
- NCT07715357
- Testing
- 3D printed intraoral stents.
- Volunteers
- 72 people
- Sponsor
- Ain Shams University
Dental Health, Space Maintainer
Evaluation of Band-Loop Space Maintainers Produced With Three-Dimensional Printer and Conventional Technique
Our research is planned as a randomised clinical trial. The main aim of our study is to evaluate the clinical success of band and loop space maintainers produced by three-dimensional printer and conventional technique and the…
- Conditions
- Dental Health, Space Maintainer, Pediatric Dentistry, 3D Printing
- Trial name
- NCT06798090
- Testing
- Band and Loop Space Maintainer Produced with Three-Dimensional Printer, Band and Loop Space Maintainer Produced with Conventional Technique
- Where
- Turkey (Türkiye)
- Volunteers
- 27 people
- Sponsor
- Aydin Adnan Menderes University
Digital Learning Aids for Special Children
A Preliminary Study on Digital Learning Aids for Special Children With TRIZ and 3D Printing Technology
During the transition phase from early intervention to primary education (4.5 years to 8.11 years), children with special needs may encounter difficulties in using digital learning media.
- Trial name
- NCT05935462
- Testing
- Digital Learning Aids
- Where
- Taiwan
- Sponsor
- Taipei Medical University Shuang Ho Hospital
Liver Cancer
Value of 3D Printing for Comprehension of Liver Surgical Anatomy
To our knowledge, it has not been analyze whether 3D printed liver model would improve the perception of a given liver tumor or the precision of operation planning in liver surgery.
- Trial name
- NCT03153332
- Testing
- surgical residents' comprehension of the hepatic anatomy
- Where
- China
- Volunteers
- 59 people
- Sponsor
- Guangzhou Women and Children's Medical Center
Caries, Dental, Caries; Dentin
3D-printed Ceromer Crowns Versus Stainless Steel in Posterior Primary Molars
The aim of the study is to compare preformed metal crowns and 3D-printed ceromer crowns in primary molars of 4-9 years old children.
- Conditions
- Caries, Dental, Caries; Dentin, Dental Caries in Children
- Trial name
- NCT07091331
- Testing
- Personalized 3D-printed pediatric ceromer crown, Prefabricated stainless steel crown group
- Where
- Mexico
- Volunteers
- 40 people
- Sponsor
- Universidad Autonoma de Baja California
Amputation, Functional Limitation
Impact Evaluation of Breizh Fabribus Intervention for Personalized Assistive Technology Creation or Adaptation
In France, more than 14 million individuals report severe functional limitations, and nearly 5 million struggle with essential daily activities.
- Conditions
- Amputation, Functional Limitation, Autonomy of Older People, Handicaps Physical
- Trial name
- BFB-IMPACT (NCT07314099)
- Where
- France
- Volunteers
- 70 people, healthy volunteers welcome
- Sponsor
- Fondation Ildys
Percutaneous Coronary Intervention
3D Printed Silicone Coronary Artery Simulator for Percutaneous Coronary Interventional Training
This study is aim to evaluate the feasibility and effectiveness of 3D printed silicone coronary artery simulator for percutaneous coronary interventional training.
- Trial name
- 3DforPCI (NCT04420715)
- Testing
- Training on coronary angiography using 3D coronary artery simulator
- Where
- China
- Volunteers
- 150 people, healthy volunteers welcome
- Sponsor
- China National Center for Cardiovascular Diseases
Tooth Movement Techniques, Distalization by Miniscrews
Evaluation of Three-Dimensional Printed Orthodontic Molar Distalizer
A randomized clinical trial to evaluate a newly designed 3D printed miniscrew-supported molar distalization device in comparison to the conventional miniscrew-supported distal jet appliance in correction of Class II malocclusion…
- Trial name
- RCT (NCT07191158)
- Testing
- Group 1 conventional, Group 2 3D printed
- Where
- Iraq
- Volunteers
- 28 people, healthy volunteers welcome
- Sponsor
- University of Baghdad
Educational Problems
Effects of a 3D Printing Technology Learning Program
3D printing technology helps rehabilitation professionals make an order-made assistive device (AD). However, most have not learned how to use the technology for clinical practice.
- Trial name
- NCT05695326
- Testing
- 3D printing technology learning program
- Where
- Japan
- Volunteers
- 10 people, healthy volunteers welcome
- Sponsor
- Gunma PAZ College
Breast Neoplasms, Breast Cancer
Evaluation of the Feasibility of Developing Personalized Breast Cancer Radiotherapy Assistive Device With 3D Printing
Breast cancer is the most common malignancy among women worldwide. For early stage breast cancer, adjuvant radiotherapy is essential to minimize loco-regional disease recurrence.
- Conditions
- Breast Neoplasms, Breast Cancer, Left Sided Breast Cancer
- Trial name
- PERSBRA (NCT04929197)
- Testing
- PERSBRA
- Where
- Taiwan
- Volunteers
- 50 people
- Sponsor
- Taipei Medical University Hospital
Scoliosis Idiopathic Adolescent Treatment
Rethinking Rigidity: Development of a 3D-Printed Scoliosis Brace With Varying Flexibility
Scoliosis bracing is an effective treatment method for idiopathic scoliosis, but only if worn consistently for many hours a day. Unsurprisingly, brace discomfort is a significant deterrent against treatment adherence.
- Trial name
- 3DSCOLIBRACE (NCT06785207)
- Testing
- 3D-printed scoliosis brace
- Where
- 2 sites in United States
- Volunteers
- 5 people
- Sponsor
- Baylor College of Medicine
Cerebral Palsy (CP), Brain Injuries
Acceptability of Paediatric Wrist Orthoses Through Co-design
The goal of this pilot interventional study (pre-post design) is to learn if a co-designed wrist-hand orthosis can improve acceptability compared to a conventional orthosis in children aged 6 to 14 years with neuromotor disorders…
- Conditions
- Cerebral Palsy (CP), Brain Injuries, Neuromotor Dysfunction
- Trial name
- NCT07861958
- Testing
- Orthosis acceptability
- Where
- Italy
- Volunteers
- 12 people
- Sponsor
- IRCCS Eugenio Medea
Spine Trauma (Thoracic and Lumbar)
3D Printing in Preoperative Planning in Thoracic and Lumbar Spine Trauma
Case series of 16 patients with lower lumbar or lower thoracic traumatic injuries treated with pedicle screw fixation. Patients were divided into two groups (n≈8 per group).
- Trial name
- NCT07727161
- Testing
- Spine stabilization using CT planning, Spine stabilization using 3D-printed model planning
- Where
- Czechia
- Volunteers
- 16 people
- Sponsor
- Masarykova Nemocnice v Usti nad Labem, Krajska Zdravotni a.s.