Clinical trials: 3d Printing, open to volunteers
Musculoskeletal Deformity, Musculoskeletal Diseases
Customized Bone Allografts by 3D-printing
Virtual surgical planning (VSP), the simulation of bone corrections in virtual reality ("Computer Aided Surgical Simulation": CASS) and 3D printing of customized implants and devices are achieving an increasingly central role in…
- Conditions
- Musculoskeletal Deformity, Musculoskeletal Diseases, Musculoskeletal Disorder
- Trial name
- 3D-MALF 2 (NCT05700526)
- Testing
- Planning of multiplanar and/or multifocal osteotomies in children by using VSP, PSIs and customized structural bone allograft, Routine preparation of bone graft according to standard protocols, Preparation of bone graft with virtual bone-matching and GSIs
- Where
- Italy
- Volunteers
- 42 people
- Sponsor
- Istituto Ortopedico Rizzoli
Developmental Dysplasia of the Hip, Acetabular Bone Loss
3D-Printed Pelvic Models for Planning Complex Total Hip Arthroplasty
Total hip arthroplasty (THA) in patients with complex acetabular anatomy can be challenging because of abnormal bone structure, deformity, or bone loss.
- Conditions
- Developmental Dysplasia of the Hip, Acetabular Bone Loss, Acetabular Fracture
- Trial name
- NCT07904637
- Testing
- Conventional Imaging-Based Preoperative Planning, CT-Based 3D-Printed Pelvic Model-Assisted Planning
- Where
- Egypt
- Volunteers
- 15 people
- Sponsor
- Ain Shams University
Endotracheal Intubation
Impact of Via CT-based 3D Printing Technology on Success Rate in Endotracheal Intubation in Students
The objective of this project is to develop a tracheal intubation teaching curriculum covering both normal and difficult airways using CT three-dimensional imaging and 3D printing technologies, enabling trainees to intuitively…
- Trial name
- NCT07612995
- Testing
- the course training-3D, the course training- traditional
- Where
- China
- Volunteers
- 80 people, healthy volunteers welcome
- Sponsor
- xiaojing wang
Bone Loss, Bone Defects
Evaluation of the Safety, Feasibility, and Early Clinical Outcomes of Patient-Specific Bone Defect Implants Fabricated From Titanium Alloy (Ti-6Al-4V) Using 3D Printing Technology
The goal of this clinical trial is to evaluate the safety and feasibility of patient-specific bone defect implants fabricated from Ti-6Al-4V using 3D printing technology and to assess early clinical outcomes within the first 12…
- Trial name
- NCT07540156
- Testing
- Patient-specific 3D-printed Ti-6Al-4V bone implant
- Where
- Vietnam
- Volunteers
- 10 people
- Sponsor
- VinUniversity
3D Printing, Oral Habit
3D-Printed Versus Conventional Palatal Cribs in Managing Tongue Thrusting Habit in Children
This randomized controlled clinical trial evaluates and compares the clinical effectiveness of 3D-printed palatal cribs versus conventional soldered palatal cribs in managing the tongue thrusting habit in pediatric patients.
- Conditions
- 3D Printing, Oral Habit, Patient Comfort
- Trial name
- NCT07895121
- Testing
- 3D-Printed Palatal Crib Appliance Therapy (Group I):, Conventional Soldered Palatal Crib Appliance Therapy (Group II)
- Where
- Egypt
- Volunteers
- 30 people
- Sponsor
- Tanta University
Space Maintenance, Gingival Health
Clinical Evaluation of 3-D Printed Partial Denture Space Maintainer
Primary dentition is the most suitable space maintainer for permanent teeth. However, as infants often lose their primary teeth too soon, using a space maintainer is the most efficient, long-lasting, and economical way to prevent…
- Trial name
- NCT06825273
- Testing
- space maintainer
- Where
- 2 sites in Egypt
- Volunteers
- 40 people
- Sponsor
- Tanta University
Flexor Tendon Injury, Tendon Injury - Hand
Effects of Different Wrist Positions in Dorsal Blocking Orthoses After Flexor Tendon Repair
This randomized controlled study aims to compare the effects of three different wrist positions (30° extension, neutral, and 30° flexion) used in dorsal blocking orthoses during early active mobilization after zone I-II flexor…
- Trial name
- NCT07489235
- Testing
- 3D-Printed Dorsal Blocking Orthosis (wrist 30 degree extension), 3D-Printed Dorsal Blocking Orthosis (wrist neutral), 3D-Printed Dorsal Blocking Orthosis (wrist 30 degree flexion)
- Where
- Turkey (Türkiye)
- Volunteers
- 64 people
- Sponsor
- Sedanur Güngör
Medulloblastoma Tumor
Evaluation of The Radioprotective Effect of 3D-Printed Intraoral Stents in Children With Brain Cancer.
Brain cancer patients undergoing radiotherapy may experience oral complications such as oral mucositis, gingival inflammation, plaque accumulation, radiation-induced caries, and reduced oral-health-related quality of life due to…
- Trial name
- NCT07715357
- Testing
- 3D printed intraoral stents.
- Volunteers
- 72 people
- Sponsor
- Ain Shams University
Dental Health, Space Maintainer
Evaluation of Band-Loop Space Maintainers Produced With Three-Dimensional Printer and Conventional Technique
Our research is planned as a randomised clinical trial. The main aim of our study is to evaluate the clinical success of band and loop space maintainers produced by three-dimensional printer and conventional technique and the…
- Conditions
- Dental Health, Space Maintainer, Pediatric Dentistry, 3D Printing
- Trial name
- NCT06798090
- Testing
- Band and Loop Space Maintainer Produced with Three-Dimensional Printer, Band and Loop Space Maintainer Produced with Conventional Technique
- Where
- Turkey (Türkiye)
- Volunteers
- 27 people
- Sponsor
- Aydin Adnan Menderes University
Caries, Dental, Caries; Dentin
3D-printed Ceromer Crowns Versus Stainless Steel in Posterior Primary Molars
The aim of the study is to compare preformed metal crowns and 3D-printed ceromer crowns in primary molars of 4-9 years old children.
- Conditions
- Caries, Dental, Caries; Dentin, Dental Caries in Children
- Trial name
- NCT07091331
- Testing
- Personalized 3D-printed pediatric ceromer crown, Prefabricated stainless steel crown group
- Where
- Mexico
- Volunteers
- 40 people
- Sponsor
- Universidad Autonoma de Baja California
Amputation, Functional Limitation
Impact Evaluation of Breizh Fabribus Intervention for Personalized Assistive Technology Creation or Adaptation
In France, more than 14 million individuals report severe functional limitations, and nearly 5 million struggle with essential daily activities.
- Conditions
- Amputation, Functional Limitation, Autonomy of Older People, Handicaps Physical
- Trial name
- BFB-IMPACT (NCT07314099)
- Where
- France
- Volunteers
- 70 people, healthy volunteers welcome
- Sponsor
- Fondation Ildys
Tooth Movement Techniques, Distalization by Miniscrews
Evaluation of Three-Dimensional Printed Orthodontic Molar Distalizer
A randomized clinical trial to evaluate a newly designed 3D printed miniscrew-supported molar distalization device in comparison to the conventional miniscrew-supported distal jet appliance in correction of Class II malocclusion…
- Trial name
- RCT (NCT07191158)
- Testing
- Group 1 conventional, Group 2 3D printed
- Where
- Iraq
- Volunteers
- 28 people, healthy volunteers welcome
- Sponsor
- University of Baghdad
Scoliosis Idiopathic Adolescent Treatment
Rethinking Rigidity: Development of a 3D-Printed Scoliosis Brace With Varying Flexibility
Scoliosis bracing is an effective treatment method for idiopathic scoliosis, but only if worn consistently for many hours a day. Unsurprisingly, brace discomfort is a significant deterrent against treatment adherence.
- Trial name
- 3DSCOLIBRACE (NCT06785207)
- Testing
- 3D-printed scoliosis brace
- Where
- 2 sites in United States
- Volunteers
- 5 people
- Sponsor
- Baylor College of Medicine
Cerebral Palsy (CP), Brain Injuries
Acceptability of Paediatric Wrist Orthoses Through Co-design
The goal of this pilot interventional study (pre-post design) is to learn if a co-designed wrist-hand orthosis can improve acceptability compared to a conventional orthosis in children aged 6 to 14 years with neuromotor disorders…
- Conditions
- Cerebral Palsy (CP), Brain Injuries, Neuromotor Dysfunction
- Trial name
- NCT07861958
- Testing
- Orthosis acceptability
- Where
- Italy
- Volunteers
- 12 people
- Sponsor
- IRCCS Eugenio Medea
Spine Trauma (Thoracic and Lumbar)
3D Printing in Preoperative Planning in Thoracic and Lumbar Spine Trauma
Case series of 16 patients with lower lumbar or lower thoracic traumatic injuries treated with pedicle screw fixation. Patients were divided into two groups (n≈8 per group).
- Trial name
- NCT07727161
- Testing
- Spine stabilization using CT planning, Spine stabilization using 3D-printed model planning
- Where
- Czechia
- Volunteers
- 16 people
- Sponsor
- Masarykova Nemocnice v Usti nad Labem, Krajska Zdravotni a.s.
CAD/CAM Space Maintainer, 3D Printing
Evaluation of Clinical Wear and Surface Roughness of Partial Restorations Produced by Additive and Subtractive Manufacturing Methods: A Split-Mouth Randomized Controlled Clinical Trial
The aim of this study is to compare the surface roughness and wear values of crowns fabricated using currently utilized 3D printing and CAD-CAM technologies.
- Conditions
- CAD/CAM Space Maintainer, 3D Printing, Dental Treatment, Dental Disease
- Trial name
- NCT07057401
- Testing
- CAD-CAM Manufactured Crowns, 3D Printed Crowns
- Where
- Turkey (Türkiye)
- Volunteers
- 30 people
- Sponsor
- Husna Selinay
Flaccid Paresis, Spastic Paresis
Comparing Digitally and Traditionally Made Ankle Foot Orthoses
The research is being done to compare two methods of creating AFOs: 1. The traditional method, which involves manually creating a mold from a plaster cast of the client's limb. This is time-consuming and labor-intensive; and 2.
- Conditions
- Flaccid Paresis, Spastic Paresis, Cerebral Palsy, Stroke
- Trial name
- NCT06828653
- Testing
- Part A First Wear Period: Traditional AFO(s), Part A First Wear Period: Digital AFO(s), Part A Second Wear Period: Traditional AFO(s)
- Where
- 2 sites in Canada
- Volunteers
- 50 people
- Sponsor
- Holland Bloorview Kids Rehabilitation Hospital
Hypoplastic Left Heart Syndrome (HLHS), Aortic Arch Hypoplasia
Seeking for Perfected Aortic Arch Reconstruction Using a Graphically Designed Patient-specific Surgical Patch
Vascular Reconstruction is one of the most challenging areas of surgery, the surgeon has to create a completely watertight reconstruction without any narrowing or deformity that will restore normal flow characteristics, even at…
- Trial name
- NCT06853054
- Testing
- Personalized patch template
- Where
- Canada
- Volunteers
- 30 people
- Sponsor
- The Hospital for Sick Children
Sinus Venosus Defect, Congenital Heart Disease
OPTImal Treatment of Sinus VENOSUS Defect
Sinus venosus defect (SVD) accounts for 10% of atrial septal defects and is characterized by an anomalous pulmonary venous return in the superior vena cava associated with a high situated atrial septal defect.
- Conditions
- Sinus Venosus Defect, Congenital Heart Disease, Sinus Venosus Atrial Septum Defect
- Trial name
- OPTIVENOSUS (NCT05865119)
- Testing
- OPTIMUS covered stent, Surgical correction of a SVD
- Where
- 13 sites in France
- Volunteers
- 60 people
- Sponsor
- Centre Chirurgical Marie Lannelongue
Premature Lungs
Clinical Trial for the Evaluation of Customized 3D Printed NIV Nasal Masks in Premature Infants
Clinical trial with crossed groups, open, masked for the evaluation of the main outcome. Inclusion of all premature infants with a birth weight less than 1500 g requiring Non-invasive Ventilation (NIV).
- Trial name
- M3DPREMAT (NCT06224816)
- Testing
- Custom 3D mask (3DM) application in neonate, Traditional mask (TM) application in neonate
- Where
- Spain
- Volunteers
- 60 people
- Sponsor
- Hospital Universitario 12 de Octubre