Clinical trials: Transtibial Amputees
Amputation
Daily Socket Comfort in Transtibial Amputee With an Active Vacuum Suspension System
The aim of this study is to evaluate the contribution of the vacuum suspension system in an ecological environment on the fitting's comfort compared to the vacuum suspension system inactive system in a multicenter prospective…
- Trial name
- NCT04804150
- Testing
- Vacuum suspension system active or inactive
- Where
- 3 sites in France
- Volunteers
- 20 people
- Sponsor
- Össur Iceland ehf
Amputation
Comparative Effectiveness of Microprocessor Controlled and Carbon Fiber Prosthetic Feet in Transtibial Amputees
The purpose of this research is to evaluate benefits of a microprocessor controlled prosthetic ankle-foot device compared to a non-microprocessor controlled or passive carbon fiber prosthetic ankle-foot device.
- Trial name
- NCT02864693
- Testing
- Kinnex, Pacifica LP
- Where
- 3 sites in United States
- Volunteers
- 30 people
- Sponsor
- Ability Prosthetics and Orthotics, Inc.
Transtibial Amputee, Transtibial Amputation
Feasibility Study Evaluating the Safety and Effectiveness of Magnetic Bead Tracking System When Used With a Bionic External Prosthesis
The investigation is an early feasibility study in up to 5 subjects, in which the primary objective is to capture preliminary safety and effectiveness information on the Magnetic Bead Tracking system.
- Trial name
- NCT07195461
- Testing
- Magnetic Bead Tracking System
- Where
- United States
- Volunteers
- 3 people
- Sponsor
- MuscleMetrix, LLC
Amputation, Amputation; Traumatic, Leg, Lower
Socket Cooling Effectiveness Take Home Study
The comfort and fit of the residual limb within a prosthetic socket are of primary concern for many amputees. The residual limb is typically covered by non-breathable and non- thermally conductive materials that can create a warm…
- Conditions
- Amputation, Amputation; Traumatic, Leg, Lower, Amputation Stump, Limb; Absence, Congenital, Lower
- Trial name
- NCT04484805
- Testing
- ICE Condition
- Where
- 2 sites in United States
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- Liberating Technologies, Inc.
Transtibial Amputees
Using Direct Molding Socket Technology for Trans-tibial Prosthesis in Developing Regions
The study aims to understand how well CPOs and amputees can adapt to using the Amparo socket technology. CPOs at the APDK and The Cure will be trained to use the Amparo socket technology then use it with their consenting patients…
- Trial name
- NCT04679701
- Testing
- Amparo Confidence Socket
- Where
- 2 sites in Kenya
- Volunteers
- 27 people, healthy volunteers welcome
- Sponsor
- Amparo GmbH
Amputation
Comparative Study Evaluating the Mobility of Transtibial Amputee Patients Using the PRO-FLEX PIVOT® Foot Versus a Class III Energy Storing and Returning (ESAR) Prosthetic Foot.
The PRO-FLEX PIVOT® is ESAR prosthetic foot with an innovative technology built around three pillars: 1. The PIVOT technology: three axes of rotation (upper support, main pivot and lower support) at the ankle, which allow both a…
- Trial name
- DEFI (NCT06627361)
- Testing
- PRO-FLEX PIVOT Foot evaluation, Class III ESAR Foot evaluation
- Where
- France
- Volunteers
- 30 people
- Sponsor
- Össur Iceland ehf
Amputation of Lower Limb, Prosthesis
LIMBER UniLeg: Rapid, On-demand, and Scaled-up Manufacturing of Customized Transtibial Prosthetic Legs for Amputees
The LIMBER UniLeg, a 3D printed single-piece transtibial prosthetic limb, is sufficiently equivalent to traditional passive prosthetic limbs (no motors or sensors), while reducing the cost and time of manufacturing and enabling…
- Conditions
- Amputation of Lower Limb, Prosthesis, Non-inferiority Trial of Prothesis
- Trial name
- NCT06648798
- Testing
- Limber Limb
- Where
- 2 sites in United States
- Volunteers
- 30 people
- Sponsor
- LIMBER Prosthetics & Orthotics Inc