PainNCT06034210
Effectiveness of Customised 3D-printed Insoles in Reducing Pain Among Frequent Park Runners
A study testing Customised 3D-printed insoles in people with Pain, run by St. Mary's University, Twickenham at 1 site in United Kingdom.
Trial summary
This study evaluates the effectiveness of the Zoles customised 3D-printed insoles to mitigate running-related pain among frequent recreational runners who participate in regular Park Run activities. Read more about this study
- Who is it for?
- Ages 35 years and olderHealthy volunteers can take part
- Conditions the study is for
- Pain
- What is being tested?
- Customised 3D-printed insoles
- Type of treatment
- Medical device
- Could I receive a placebo?
- No, everyone receives an active treatment
- How many people
- 210 participants
- Where
- 1 siteUnited Kingdom
- Study dates
- 16 Sep 2023to 25 Nov 2024
- Phase
- Interventional
- Are there results?
- None posted in the registry
Key requirements
Who can take part, as listed by the sponsor. Only the study team can confirm whether you are eligible, so take this list to your doctor.
- Ages 35 years and older
- All sexes
- Healthy volunteers accepted
- Adult, Older adult
Who may be able to join
- Participant is ≥ 35 years old at commencement of trial
- Participant can read, speak and understand English
- Participant can receive e-mails and complete online questionnaires
- Participant is a frequent runner who participate in regular Park Runs
- Participant is capable of running at commencement of trial
Who cannot join
- Individuals with severe foot deformities
- Individuals with uncontrolled diabetes with foot complications, or other conditions that might interfere with their ability to safely use the insoles and participate in running activities
Trial locations and contacts
1 site in 1 country.
United Kingdom1 site
St Mary's University, Faculty of Sport, Technology and Health Sciences
Twickenham, London, TW1 4SX
About this study
Official title: The Effectiveness of Customised 3D-printed Insoles on Perceived Pain, Comfort, and Completion Time Among Frequent Park Runners: A Pragmatic Randomised Controlled Trial (The ZOLES Trial)
This study evaluates the effectiveness of the Zoles customised 3D-printed insoles to mitigate running-related pain among frequent recreational runners who participate in regular Park Run activities. All participants will have their feet scanned, after which half of the participants will be provided with customised 3D-printed insoles, while the other half will receive no intervention.
Read the detailed description
The ZOLES trial is a pragmatic, outcome assessor blinded, randomised, controlled, superiority trial, with a two-group parallel design. Frequent recreational runners who participate in regular Park Run activities will undergo a foot scanning after which they will be randomised in a 1:1 allocation ratio to either receive a customised 3D-printed insole (Zoles ApS, Espergærde, DK-3060, Denmark), or to be in a "do-as-usual" control group. It is expected that the allocated intervention group participants will have received their customised insoles around two weeks after baseline during the follow-up period (one week to manufacture, one week to distribute). The primary endpoint is change in running-related pain 10 weeks after baseline (∼8 weeks after receiving allocated intervention).
A full trial protocol, based on the "SPIRIT 2013 explanation and elaboration: guidance for protocols of clinical trials" and the "PREPARE Trial guide", will be published and made publicly available. The trial report will follow the "REPORT guide", and thus adhere to the CONSORT guidelines for reporting parallel group randomised trials, using the CONSORT extension for pragmatic trials, as well as the updated CONSORT-Outcomes 2022 extension. The TIDieR template is used to describe the intervention to aid future replication.
The central aim of this study is to establish the effectiveness of the Zoles customised 3D-printed insoles in alleviating running-related pain among frequent recreational runners participating in regular Park Run activities when compared against a "do-as-usual" control group. This clinical effectiveness will be reported in the main trial paper, which also includes the following key secondary outcomes: Global Rating of Change (GRoC) in overall daily pain and discomfort, Running-related foot/footwear comfort, 5-k (Park Run) completion time, running-related injury incidence rate, Time-loss from running, running exposure in miles and time, adherence to the intervention during daily- and running activities, and adverse events from using the Zoles insoles. Missing values will be imputed using multiple imputations by chained equations based on the following variables: All previous scores within the relevant outcome category, Age, Sex, Group Allocation, and enrolment (Park Run) location.
A total of 200 participants are anticipated to be enrolled, resulting in a minimum of 100 participants in each arm. The enrolment concludes once at least 100 participants have been allocated to each arm. Being a pragmatic trial, the eligibility criteria are loosely defined such that participants should simply be regular runners engaged in frequent Park Run activities, at a minimum 35 years of age. The participants will undergo balanced block randomization (1:1 allocation ratio), ensuring stratification for sex and enrolment location. The trial will include prospective weekly data collection using e-mail-distributed surveys via REDCap (Vanderbilt University, Nashville, TN, USA) throughout the 10-week follow-up period. After the conclusion of the initial 10-week trial phase, the control group will also be provided with their customised 3D-printed insoles. This will not be weekly monitored, however, following an additional 8-week period with the insoles, this group will then complete the follow-up questionnaire again, to ascertain whether similar benefits or deterioration from the insoles in a manner consistent with the original experimental group are experienced. At the conclusion of the trial, and as part of a post-market surveillance approach, all participants, both from the original experimental and control groups (who by this point have received the intervention), will be administered a final questionnaire after a 1-year period to evaluate the long-term effects and durability of the benefits associated with the customised 3D-printed insoles.
The primary outcome; change in running-related pain from baseline to follow-up, will be calculated using negative binomial regression, adjusting for values reported at baseline. Both the Global Rating of Change (GRoC) in overall daily pain and discomfort, and Running-related foot/footwear comfort will be calculated similarly. Injury incidence rate ratios will be estimated per 1000 hours of running exposure using Poisson regression. Mean time-loss from running will be calculated using negative binomial regression. Adherence to the intervention will be descriptively analysed and presented, and adverse event due to the Zoles insoles will be presented in type and frequency. Every analysis in the main trial report will abide by the intention to treat principle, which means including all participants in the analyses, regardless of intervention adherence-signifying that participants will be analyzed based on initial randomization. In the primary trial report, all collected outcomes will be listed, and it will also be stated that the below-mentioned 'other pre-specified outcomes' will be reported in a subsequent secondary analysis publication with a clear reference to the primary trial registration.
The subsequent secondary analysis publication will hold the label "secondary and long-term follow-up analysis from a pragmatic randomized controlled trial" in the title. The aims of this secondary subgroup analysis study are two-fold: First, it is to investigate the immediate therapeutic effect of Zoles insoles, focusing only on participants with clinically relevant baseline pain levels (11-NRS ≥ 3). Secondly, this will include our long-term post-market analysis to evaluate the long-term effects and durability of the benefits associated with the customised 3D-printed insoles one year post-intervention. In the secondary subgroup analysis, the following outcomes will be reported: Percentage of participants achieving a change of at least MCID (11-NRS ≥ 2) in running-related pain, Time until change in running-related Pain of at least MCID, Change among participants with clinically relevant running-related pain at baseline, Pre-trial expectations to the therapeutic effect of using the Zoles insoles, and Post-trial experiences on the therapeutic effect of using the Zoles insoles. Incorporating the expectations and post-intervention experiences as covariates, regression models will be constructed to understand the potential influence of these factors on the efficacy of the Zoles insoles intervention within this specific subgroup of participants.
- Conditions
- Pain
- Being tested
- Customised 3D-printed insoles
- Medical subject headings
- Pain
What participants receive
What participants receive. In a randomised study each person is assigned to one group by chance.
Customised 3D-printed insolesDevice
Also called Zoles insoles
Based on measurements from the 3D scanning procedure, and factoring in individual data such as age, weight, and activity preferences, custom insoles are designed using the ZOLA software. The insoles are then 3D-printed by Zoles ApS in Espergærde (Denmark), using BCN3D printers (Barcelona, Spain) and a TPU (Thermoplastic Polyurethane) filament material from Recreus (Alicante, Spain). The printed insoles are tailored for optimal support, performance, and comfort, with varying densities for areas like the arch and heel. They are finished with an OnSteam® microfiber cover for added durability and comfort. The insoles are intended for regular insertion into participants' shoes to align with their unique biomechanical needs. (Information translated and adapted from: https://www.zoles.eu/da/processen-bag-saalerne/)
| Study group | Role | What they receive |
|---|---|---|
| ZOLES insoles | Experimental | Participants allocated to the intervention group will receive customised 3D-printed insoles (Zoles ApS, Espergærde, DK-3060, Denmark) to mitigate running-related pain and discomfort. Being a pragmatic trial, all participants are permitted to continue or initiate any usual care of their choice. Receives: Device: Customised 3D-printed insoles |
| Do-as-usual | No intervention | Participants allocated to the control group are a "do-as-usual" comparator. This implies, that the participants can treat and prevent running-related pain and discomfort in any way they wish, except using the Zoles 3D-printed insoles. |
What is being measured
The primary outcome is the main question the study is designed to answer.
Running-related Pain
Change in running-related pain from baseline to follow-up during the trial period. Pain is scored on a numeric rating scale from 0 - 10 (0 = No pain at all, 10 = Extremely painful; Salaffi et al., 2004)
Measured: 10 weeks
Secondary outcomes (10)
Global Rating of Change (GRoC) in overall daily pain and discomfort
Participants' self-perceived change in overall daily pain and discomfort in relation to when they were enrolled in the study. Participants rate their perceived improvement or deterioration on a 7-point scale ranging from -3 = "much worse" to 3 = "much better" (Bobos et al., 2019)
Measured: 10 weeks
Running-related foot/footwear comfort
Change in running-related foot/footwear comfort from baseline to follow-up during the trial period. Comfort is scored on a numeric rating scale from 0 - 10 (0 = Extremely uncomfortable, 10 = Extremely comfortable; Menz \& Bonnano, 2021)
Measured: 10 weeks
5k-completion time
Time in minutes taken to complete the weekly 5 km Park Run at their chosen Park Run location
Measured: 10 weeks
Running-related injuries
Rate of running-related injuries sustained during the trial period. The incidence rate is defined as the number of injuries per 1000 hours of running exposure
Measured: 10 weeks
Time-loss
Time lost from running in number of days due to running-related pain, discomfort, or injury
Measured: 10 weeks
Weekly Milage
Weekly distance covered from running activities during the trial period
Measured: 10 weeks
Weekly running exposure
Weekly exposure to running activities in hours and minutes during the trial period
Measured: 10 weeks
Adherence to intervention, ADL%
Relative use of the Zoles insoles during all sitting/standing/walking/driving activities
Measured: 10 weeks
Adherence to intervention, RUN%
Relative use of the Zoles insoles during all running activities
Measured: 10 weeks
Adverse events from using Zoles insoles
Adverse events will be reported as type and number of events. The included participants will be encouraged to report any adverse events related to the use of Zoles via the trial hotline
Measured: 52 weeks
Timeline
From the start of the study to its completion; the mark is today. Estimated dates are the sponsor’s plan.
- First posted13 Sep 2023
- Study start16 Sep 2023
- Primary completion2 Jan 2024
- Study completion25 Nov 2024
Resources
- Official record on ClinicalTrials.govThe registry entry this page is built from, with its full change history.
- Publications (1)Papers the sponsor has linked to this study.
- Other trials for PainStudies of the same condition, open and under way.
- What the trial phases meanHow a treatment moves from first tests in people to approval.
More details
For doctors and researchers: how the study is designed, who runs it, and its registry IDs.
Study design
- Study type
- Interventional
- Phase
- Phase N/A
- Primary purpose
- Treatment
- Allocation
- Randomised
- Intervention model
- Parallel groups
- Masking
- Single blind
- Who is masked
- Outcomes assessor
- Enrolment
- 210 participants (actual)
Sponsor and investigators
- Lead sponsor
- St. Mary's University, Twickenham
- Sponsor type
- University, hospital or other
- Collaborators
- Copenhagen University Hospital, Hvidovre, Aalborg University, Zoles ApS
- Responsible party
- Sponsor
- Investigators
- Filip Gertz Lysdal, MSc, PhD, Study director, Faculty of Sport, Technology and Health Sciences, St Mary's University, United KingdomSuleyman Ibrahim, MEd, Principal investigator, Faculty of Sport, Technology and Health Sciences, St Mary's University, United KingdomChris Djurtoft, PT, MSc, Study chair, Department of Clinical Medicine, Aalborg University, DenmarkRik Mellor, MSc, Study chair, Faculty of Sport, Technology and Health Sciences, St Mary's University, United KingdomKristian Thorborg, PT, MSc, PhD, Study chair, Sports Orthopaedic Research Center-Copenhagen (SORC-C), Department of Orthopaedic Surgery, Copenhagen University Hospital, Amager-Hvidovre, Denmark
IDs, dates and publications
- ClinicalTrials.gov ID
- NCT06034210
- Sponsor's protocol ID
- ZolesRCT
- Status last verified
- Nov 2024
- First submitted
- 4 Sep 2023
- Last updated
- 26 Nov 2024
- Results posted
- No
- Data monitoring committee
- No
- FDA-regulated drug
- No
- FDA-regulated device
- No
- Individual data sharing
- No
Publications
Ibrahim S, Djurtoft C, Mellor R, Thorborg K, Lysdal FG. The effectiveness of customised 3D-printed insoles on perceived pain, comfort, and completion time among frequent Park Runners: Study protocol for a pragmatic randomised controlled trial (The ZOLES RCT). Foot (Edinb). 2024 Mar;58:102068. doi: 10.1016/j.foot.2024.102068. Epub 2024 Feb 6.
PubMed 38350194
Study at a glance
From the registry record, last updated by the sponsor on 26 Nov 2024. Recruitment status is as the sponsor reported it: confirm with the study team.
- Official title
- The Effectiveness of Customised 3D-printed Insoles on Perceived Pain, Comfort, and Completion Time Among Frequent Park Runners: A Pragmatic Randomised Controlled Trial (The ZOLES Trial)
- ClinicalTrials.gov ID
- NCT06034210
- Acronym / sponsor ID
- ZolesRCT
- Conditions
- Pain
- Study type
- Interventional
- Recruitment status
- Completed
- Enrolment
- 210 participants (actual)
- Lead sponsor
- St. Mary's University, TwickenhamUniversity, hospital or other
- Collaborators
- Copenhagen University Hospital, Hvidovre, Aalborg University, Zoles ApS
- Study start
- 16 Sep 2023 (actual)
- Primary completion
- 2 Jan 2024 (actual)
- Study completion
- 25 Nov 2024 (actual)
- First posted
- 13 Sep 2023 (actual)
- Results
- Not posted in the source record
Clinical summary
The research question as the sponsor registered it. This describes what the study plans to test, not what it found.
This study evaluates the effectiveness of the Zoles customised 3D-printed insoles to mitigate running-related pain among frequent recreational runners who participate in regular Park Run activities. All participants will have their feet scanned, after which half of the participants will be provided with customised 3D-printed insoles, while the other half will receive no intervention.
Detailed description
The ZOLES trial is a pragmatic, outcome assessor blinded, randomised, controlled, superiority trial, with a two-group parallel design. Frequent recreational runners who participate in regular Park Run activities will undergo a foot scanning after which they will be randomised in a 1:1 allocation ratio to either receive a customised 3D-printed insole (Zoles ApS, Espergærde, DK-3060, Denmark), or to be in a "do-as-usual" control group. It is expected that the allocated intervention group participants will have received their customised insoles around two weeks after baseline during the follow-up period (one week to manufacture, one week to distribute). The primary endpoint is change in running-related pain 10 weeks after baseline (∼8 weeks after receiving allocated intervention).
A full trial protocol, based on the "SPIRIT 2013 explanation and elaboration: guidance for protocols of clinical trials" and the "PREPARE Trial guide", will be published and made publicly available. The trial report will follow the "REPORT guide", and thus adhere to the CONSORT guidelines for reporting parallel group randomised trials, using the CONSORT extension for pragmatic trials, as well as the updated CONSORT-Outcomes 2022 extension. The TIDieR template is used to describe the intervention to aid future replication.
The central aim of this study is to establish the effectiveness of the Zoles customised 3D-printed insoles in alleviating running-related pain among frequent recreational runners participating in regular Park Run activities when compared against a "do-as-usual" control group. This clinical effectiveness will be reported in the main trial paper, which also includes the following key secondary outcomes: Global Rating of Change (GRoC) in overall daily pain and discomfort, Running-related foot/footwear comfort, 5-k (Park Run) completion time, running-related injury incidence rate, Time-loss from running, running exposure in miles and time, adherence to the intervention during daily- and running activities, and adverse events from using the Zoles insoles. Missing values will be imputed using multiple imputations by chained equations based on the following variables: All previous scores within the relevant outcome category, Age, Sex, Group Allocation, and enrolment (Park Run) location.
A total of 200 participants are anticipated to be enrolled, resulting in a minimum of 100 participants in each arm. The enrolment concludes once at least 100 participants have been allocated to each arm. Being a pragmatic trial, the eligibility criteria are loosely defined such that participants should simply be regular runners engaged in frequent Park Run activities, at a minimum 35 years of age. The participants will undergo balanced block randomization (1:1 allocation ratio), ensuring stratification for sex and enrolment location. The trial will include prospective weekly data collection using e-mail-distributed surveys via REDCap (Vanderbilt University, Nashville, TN, USA) throughout the 10-week follow-up period. After the conclusion of the initial 10-week trial phase, the control group will also be provided with their customised 3D-printed insoles. This will not be weekly monitored, however, following an additional 8-week period with the insoles, this group will then complete the follow-up questionnaire again, to ascertain whether similar benefits or deterioration from the insoles in a manner consistent with the original experimental group are experienced. At the conclusion of the trial, and as part of a post-market surveillance approach, all participants, both from the original experimental and control groups (who by this point have received the intervention), will be administered a final questionnaire after a 1-year period to evaluate the long-term effects and durability of the benefits associated with the customised 3D-printed insoles.
The primary outcome; change in running-related pain from baseline to follow-up, will be calculated using negative binomial regression, adjusting for values reported at baseline. Both the Global Rating of Change (GRoC) in overall daily pain and discomfort, and Running-related foot/footwear comfort will be calculated similarly. Injury incidence rate ratios will be estimated per 1000 hours of running exposure using Poisson regression. Mean time-loss from running will be calculated using negative binomial regression. Adherence to the intervention will be descriptively analysed and presented, and adverse event due to the Zoles insoles will be presented in type and frequency. Every analysis in the main trial report will abide by the intention to treat principle, which means including all participants in the analyses, regardless of intervention adherence-signifying that participants will be analyzed based on initial randomization. In the primary trial report, all collected outcomes will be listed, and it will also be stated that the below-mentioned 'other pre-specified outcomes' will be reported in a subsequent secondary analysis publication with a clear reference to the primary trial registration.
The subsequent secondary analysis publication will hold the label "secondary and long-term follow-up analysis from a pragmatic randomized controlled trial" in the title. The aims of this secondary subgroup analysis study are two-fold: First, it is to investigate the immediate therapeutic effect of Zoles insoles, focusing only on participants with clinically relevant baseline pain levels (11-NRS ≥ 3). Secondly, this will include our long-term post-market analysis to evaluate the long-term effects and durability of the benefits associated with the customised 3D-printed insoles one year post-intervention. In the secondary subgroup analysis, the following outcomes will be reported: Percentage of participants achieving a change of at least MCID (11-NRS ≥ 2) in running-related pain, Time until change in running-related Pain of at least MCID, Change among participants with clinically relevant running-related pain at baseline, Pre-trial expectations to the therapeutic effect of using the Zoles insoles, and Post-trial experiences on the therapeutic effect of using the Zoles insoles. Incorporating the expectations and post-intervention experiences as covariates, regression models will be constructed to understand the potential influence of these factors on the efficacy of the Zoles insoles intervention within this specific subgroup of participants.
Study design
- Primary purpose
- Treatment
- Allocation
- Randomised
- Intervention model
- Parallel groups
- Masking
- Single blind (outcomes assessor)
- Number of arms
- 2
| Arm | Type | Receives |
|---|---|---|
| ZOLES insoles | Experimental | Device: Customised 3D-printed insolesParticipants allocated to the intervention group will receive customised 3D-printed insoles (Zoles ApS, Espergærde, DK-3060, Denmark) to mitigate running-related pain and discomfort. Being a pragmatic trial, all participants are permitted to continue or initiate any usual care of their choice. |
| Do-as-usual | No intervention | –Participants allocated to the control group are a "do-as-usual" comparator. This implies, that the participants can treat and prevent running-related pain and discomfort in any way they wish, except using the Zoles 3D-printed insoles. |
Who may qualify
- Ages
- 35 years and older
- Sex
- All
- Healthy volunteers
- Accepted
- Age groups
- Adult, Older adult
Key inclusion criteria (5 listed)
- Participant is ≥ 35 years old at commencement of trial
- Participant can read, speak and understand English
- Participant can receive e-mails and complete online questionnaires
- Participant is a frequent runner who participate in regular Park Runs
- Participant is capable of running at commencement of trial
Key exclusion criteria (2 listed)
- Individuals with severe foot deformities
- Individuals with uncontrolled diabetes with foot complications, or other conditions that might interfere with their ability to safely use the insoles and participate in running activities
Eligibility is decided by the study team after screening; this overview does not establish that a patient qualifies. Full inclusion and exclusion criteria.
Interventions
| Intervention | Type | Arms |
|---|---|---|
| Customised 3D-printed insolesAlso: Zoles insolesBased on measurements from the 3D scanning procedure, and factoring in individual data such as age, weight, and activity preferences, custom insoles are designed using the ZOLA software. The insoles are then 3D-printed by Zoles ApS in Espergærde (Denmark), using BCN3D printers (Barcelona, Spain) and a TPU (Thermoplastic Polyurethane) filament material from Recreus (Alicante, Spain). The printed insoles are tailored for optimal support, performance, and comfort, with varying densities for areas like the arch and heel. They are finished with an OnSteam® microfiber cover for added durability and comfort. The insoles are intended for regular insertion into participants' shoes to align with their unique biomechanical needs. (Information translated and adapted from: https://www.zoles.eu/da/processen-bag-saalerne/) | Device | ZOLES insoles |
Primary outcome
Running-related Pain
Time frame: 10 weeks
Change in running-related pain from baseline to follow-up during the trial period. Pain is scored on a numeric rating scale from 0 - 10 (0 = No pain at all, 10 = Extremely painful; Salaffi et al., 2004)
10 secondary outcomes
Global Rating of Change (GRoC) in overall daily pain and discomfort
Time frame: 10 weeks
Running-related foot/footwear comfort
Time frame: 10 weeks
5k-completion time
Time frame: 10 weeks
Running-related injuries
Time frame: 10 weeks
Time-loss
Time frame: 10 weeks
Weekly Milage
Time frame: 10 weeks
Weekly running exposure
Time frame: 10 weeks
Adherence to intervention, ADL%
Time frame: 10 weeks
Adherence to intervention, RUN%
Time frame: 10 weeks
Adverse events from using Zoles insoles
Time frame: 52 weeks
Results and safety
The study is completed, but results are not available in the source record. That does not mean the treatment did or did not work.
Research links
- Official record on ClinicalTrials.govLast updated by the sponsor 26 Nov 2024.
- Background: PubMed 38350194Ibrahim S, Djurtoft C, Mellor R, Thorborg K, Lysdal FG. The effectiveness of customised 3D-printed insoles on perceived pain, comfort, and completion time among frequent Park Runners: Study protocol for a pragmatic randomised controlled trial (The ZOLES RCT). Foot (Edinb). 2024 Mar;58:102068. doi: 10.1016/j.foot.2024.102068. Epub 2024 Feb 6.
- Individual participant dataSharing planned: No
Related trials for Pain
Not yet recruiting
Effect of Stress Ball Use During Femoral Arterial Sheath Removal After Coronary Angiography
Femoral Arterial Sheath Removal, Stress Ball
Recruiting
Empowered Relief® for Cancer Survivors With Chronic Pain
Chronic Pain Due to Cancer, Pain Catastrophizing
RecruitingPhase 4
ESP Blocks for Posterior Spinal Fusion
Postoperative Pain
RecruitingObservational study
Pain Phenotypes in Individuals With Multiple Sclerosis
Multiple Sclerosis, Chronic Pain
Not yet recruiting
Effects of Hip Hinge Exercises on Pain, Range of Motion and Functional Disability in Non-specific Low Back Pain.
Low Back Pain
Referral and contact
AzTrials does not enrol participants or take referrals. Contact the study team or a site listed below; they decide who can take part. This study is not recruiting at the moment.
Filip Gertz Lysdal, MSc, PhD study director
Faculty of Sport, Technology and Health Sciences, St Mary's University, United Kingdom
Suleyman Ibrahim, MEd principal investigator
Faculty of Sport, Technology and Health Sciences, St Mary's University, United Kingdom
Chris Djurtoft, PT, MSc study chair
Department of Clinical Medicine, Aalborg University, Denmark
1 site in 1 country: see every site and its status.
Questions about this trial
What is this clinical trial studying?
A study testing Customised 3D-printed insoles in people with Pain, run by St. Mary's University, Twickenham at 1 site in United Kingdom.
The full registered description is in the About this study section and the official record.
Who may be eligible to take part?
The sponsor lists 5 inclusion and 2 exclusion criteria. Eligibility is decided by the study team after screening, so read the full criteria and contact a listed site.
Is this clinical trial currently recruiting?
The record says: finished, as of the sponsor's last update on 26 Nov 2024. Status can change between updates, so confirm with the study contact before making plans.
Where is the study taking place?
The record lists 1 site in United Kingdom. Whether a site is taking part right now should be confirmed with that site. See every site.
What are the possible benefits and risks?
They depend on the study and the treatment, and no study can promise a benefit. The study team explains the known risks during informed consent, before anyone joins; the record itself does not list them.
Are results available for this study?
The study is completed, but results are not available in the source record. That does not mean the treatment did or did not work.
How can a doctor refer a patient or contact the research team?
The record lists no contact. The official record names the sponsor, who can be asked directly. AzTrials does not enrol participants or take referrals.
What does the primary outcome measure?
Running-related Pain (time frame: 10 weeks). It is what the study was designed to measure, not a finding.
Where can I read the original study information?
On the ClinicalTrials.gov record for NCT06034210, which also lists 1 linked publication.
Does a listing mean the treatment is approved or proven to work?
No. A listing means the study is registered. It does not show that the treatment is safe, works, or is approved by a regulator.
How often is this information updated?
AzTrials copies changed records from ClinicalTrials.gov every night and reloads the whole registry every week. The sponsor last updated this record on 26 Nov 2024.