Clinical trials: CAD/CAM
Enamel Hypoplasia, Molar-Incisor Hypomineralization (MIH)
Clinical Comparison of CAD/CAM Nanohybrid Composite and Hybrid Ceramic Overlays in Children With Molar-Incisor Hypomineralisation
This clinical study was conducted to compare two different dental materials used in the treatment of children who have a condition called molar-incisor hypomineralization (MIH).
- Conditions
- Enamel Hypoplasia, Molar-Incisor Hypomineralization (MIH), Restoration of Permanent Molars Affected by MIH With CAD/CAM Blocks
- Trial name
- NCT06987448
- Testing
- Semi-direct onlay restoration using CAD/CAM hybrid composite block, Semi-direct onlay restoration using CAD/CAM hybrid ceramic block
- Where
- Turkey (Türkiye)
- Volunteers
- 20 people
- Sponsor
- Alp Akça
CAD/CAM, 3D-printed
Clinical Evaluation of 3D-Printed Resin Versus CAD/CAM-Milled Lithium Disilicate Overlay Restorations
The aim of this study is to clinically evaluate the performance of 3D-printed resin and CAD/CAM lithium disilicate overlay restorations.
- Conditions
- CAD/CAM, 3D-printed, Lithium Disilicate, Overlay Restorations
- Trial name
- NCT07853118
- Testing
- 3D-printed ODYX-CR ceramic-filled resin, CAD/CAM-milled lithium disilicate ceramic
- Where
- Egypt
- Volunteers
- 40 people, healthy volunteers welcome
- Sponsor
- Tanta University
CAD/CAM, Patient Specific Implant
Tooth and Bone-borne Cutting/Repositioning Guide and Patient-specific Implant(PSI)
Dentofacial deformity refers to a group of disorders characterized by malocclusion and facial asymmetry resulting from developmental abnormalities of the maxilla and mandible, which cause morphological and positional anomalies of…
- Conditions
- CAD/CAM, Patient Specific Implant, Orthognathic Surgery, Surgery-first
- Trial name
- PSI (NCT07634276)
- Testing
- bimaxillary surgery(Lefort I and SSRO)
- Where
- China
- Volunteers
- 50 people, healthy volunteers welcome
- Sponsor
- Peking Union Medical College
Denture, CAD/CAM
Effect of Certain Denture Disinfectants on Surface Topography, Microhardness and Dimensional Stability of CAD/CAM Milled Polymethyl Methacrylate and Polyether Ether Ketone Denture Base Materials
This study aims to evaluate and compare the influence of different denture cleansing methods using 1% sodium hypochlorite solution, 0.2% chlorhexidine solution and effervescent alkaline peroxide tablet solution -according to…
- Conditions
- Denture, CAD/CAM, Stability, PEEK
- Trial name
- NCT07672847
- Testing
- M0 group, M1 group : PMMA+ Sodium hypochlorite, M2 group: PMMA+ Chlorhexidine
- Where
- Egypt
- Volunteers
- 88 people
- Sponsor
- Menoufia University
Titanium Ceramic Crown, CAD/CAM Milling
Clinical Follow-up of Porcelain Veneering on Titanium Crowns Produced by Different Techniques
This clinical study aimed to evaluate the short-term clinical performance of porcelain-veneered titanium crowns fabricated using two different techniques: conventional casting and CAD/CAM milling.
- Conditions
- Titanium Ceramic Crown, CAD/CAM Milling, Titanium Casting
- Trial name
- NCT07459842
- Testing
- Casting Titanium-Ceramic Crown, CAD/CAM Titanium-Ceramic Crown
- Where
- Turkey (Türkiye)
- Volunteers
- 27 people
- Sponsor
- Ege University
CAD-CAM, Prospective Study
Clinical Evaluation of Additive and Subtractive Onlay Restorations
The goal of this clinical trial is to learn whether onlay restorations produced by additive manufacturing [three-dimensional (3D) printing] and subtractive manufacturing [Computer-Aided Design/Computer-Aided Manufacturing…
- Conditions
- CAD-CAM, Prospective Study, 3D Printing, Clinical Assessment
- Trial name
- CIP-ONLAY (NCT07195201)
- Testing
- 3D Printed Onlay Restoration, CAD/CAM Onlay Restoration
- Where
- Turkey (Türkiye)
- Volunteers
- 29 people
- Sponsor
- Ayse Tugba Erturk Avunduk
Prefabricated, CAD
Prefabricated CAD CAM Allogeneic Ring Blocks in the Anterior Maxilla With Immediate Implantation
Clinical and radiographic evaluation of a new modification of ring technique using omputeraided design/computer-aided manufacturing (CAD/CAM) milling of allogeneic bone block for anterior maxilla ridge augmentation with immediate…
- Conditions
- Prefabricated, CAD, CAM, Allogeneic Ring Blocks
- Trial name
- NCT07163351
- Testing
- CAD/CAM allogenic bone block
- Where
- Egypt
- Volunteers
- 20 people
- Sponsor
- Tanta University
Socket Preservation, Implant-supported Single Crowns
Hyaluronic Acid and Polynucleotides in Ridge Preservation
The aim of this study is to test the use of a bovine-derived bone graft combined with a polynucleotides-rich hyaluronic acid (PNHA) gel for the preservation of the bone after a tooth extraction (alveolar ridge preservation) and…
- Conditions
- Socket Preservation, Implant-supported Single Crowns, Hyaluronic Acid, CAD-CAM
- Trial name
- P-005 (NCT07099846)
- Testing
- regeneration of post extraction socket with biomaterials
- Where
- 2 sites in Italy
- Volunteers
- 40 people
- Sponsor
- University of Parma
Speech, Denture, Partial, Removable
Intelligibility and Acoustic Speech Performance of CAD/CAM Milled Titanium Partial Dentures
Partial dentures play a crucial role in restoring oral function and aesthetics for patients with missing teeth. Traditionally, these prostheses have been fabricated using materials such as acrylic resin or cobalt-chromium alloys.
- Conditions
- Speech, Denture, Partial, Removable, CAD-CAM
- Trial name
- NCT06589570
- Testing
- Removable Partial Denture
- Where
- Egypt
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- Badr University
CAD/CAM Space Maintainer, 3D Printing
Evaluation of Clinical Wear and Surface Roughness of Partial Restorations Produced by Additive and Subtractive Manufacturing Methods: A Split-Mouth Randomized Controlled Clinical Trial
The aim of this study is to compare the surface roughness and wear values of crowns fabricated using currently utilized 3D printing and CAD-CAM technologies.
- Conditions
- CAD/CAM Space Maintainer, 3D Printing, Dental Treatment, Dental Disease
- Trial name
- NCT07057401
- Testing
- CAD-CAM Manufactured Crowns, 3D Printed Crowns
- Where
- Turkey (Türkiye)
- Volunteers
- 30 people
- Sponsor
- Husna Selinay
Restoration of Primary Molars With CAD/CAM Crowns
Primary Molars Restoration Using Different Pediatric Crowns.
study aims to compare hybrid ceramic CAD/CAM and prefabricated zirconia ans stainless steel crowns restoring primary molars through In-vivo evaluation of the clinical outcomes in terms of; crown retention, stain resistance and…
- Trial name
- NCT04144062
- Testing
- CAD/CAM crowns
- Where
- Egypt
- Volunteers
- 100 people, healthy volunteers welcome
- Sponsor
- Nehal Salman
CAD-CAM, Patients Specific Manufacturing
Analysis of Mandibular Proximal Segment Position Using Virtual Orthognathic Surgical Planning, Individualized Guides, and Osteosynthesis Plates
Orthognathic surgery is a surgical procedure performed to correct dentofacial deformities. In recent years, with the use of virtual surgical planning, cutting guides, and patient-specific osteosynthesis plates, highly predictable…
- Conditions
- CAD-CAM, Patients Specific Manufacturing, Osteotomy, Sagittal Split Ramus
- Trial name
- NCT06442787
- Testing
- conventional splints, cutting guides and positioning guides, cutting guides and fixation plates
- Where
- Turkey (Türkiye)
- Volunteers
- 60 people, healthy volunteers welcome
- Sponsor
- Bezmialem Vakif University
CAD/CAM Space Maintainer
"Evaluation of Clinical Performance and Success Rate of CAD/CAM Versus Conventional Band and Loop Space Maintainer"
This study is to evaluate and compare CAD/CAM zircon space maintainer and conventional metal of band and loop space maintainers in terms of plaque deposits and gingival health and, the success rate of the appliances in terms of…
- Trial name
- NCT05134714
- Testing
- CAD/CAM zircon band and loop space maintainer, Conventional metal band and loop space maintainer
- Volunteers
- 18 people, healthy volunteers welcome
- Sponsor
- Ain Shams University
the Clinical Performance of Indirect Restoration Fabricated From Nanohybrid Cad Cam Composite Blocks and Ceramic Blocks
Comparing Nano Hybrid Composite Blocks With Ceramic Blocks in Indirect Restorations 2. Protocol Registration:
comparing nano hybrid composite blocks grandio blocks (VOCO) with ceramic blocks (Emax) in indirect restorations using modified USPH criteria (marginal integrity) to see if there will be a significant different between two blocks
- Trial name
- NCT03926676
- Testing
- grandio blocks, emax
- Where
- Egypt
- Volunteers
- 42 people, healthy volunteers welcome
- Sponsor
- Cairo University