Clinical trials: CAD/CAM
Foot Injury, Foot Deformity
Comparing Clinical Outcomes Using Two Insole Manufacture Techniques
The main purpose of this study is to find out if scanning the foot using a 3D scanner influences the effectiveness of custom made insoles, compared to the more traditional approach of taking a foam-box impression cast of the…
- Conditions
- Foot Injury, Foot Deformity, Foot Sprain, Feet, Flat
- Trial name
- NCT05444192
- Testing
- CAD/CAM insoles
- Where
- United Kingdom
- Volunteers
- 114 people
- Sponsor
- NHS Greater Glasgow and Clyde
Dental Cements, Caries,Dental
Clinical Performance of Chairside CAD/CAM Restorations
This investigation will be a longitudinal clinical trial to study the long-term clinical performance of a resin cement for chairside CAD/CAM restorations.
- Trial name
- NCT04279574
- Testing
- Lithium disilicate onlays (IPS emaxCAD/Ivoclar), Chairside zirconia crowns (3M)
- Where
- United States
- Volunteers
- 58 people
- Sponsor
- Solventum US LLC
Single Edentulous Space
Fabrication of a Definitive Cad/Cam Titanium Abutment Prior to Guided Surgery: a Pilot Study.
The study will involve placing a dental implant through a guided surgery protocol developed using 3D CT technology. Because the implant position is planned digitally using the CT data from the patient, this allows investigation…
- Trial name
- NCT02218541
- Testing
- abutment margin 0.5 mm subgingival, abutment margin 1.5 mm subgingival
- Where
- United States
- Volunteers
- 22 people, healthy volunteers welcome
- Sponsor
- University of North Carolina, Chapel Hill
Fractured Tooth, Decayed Tooth
Celtra Duo Computer Assisted Design/Computer Assisted Machining (CAD/CAM) Dental Crown Study
This investigation will be a clinical trial to study the performance of a newly developed high strength ceramic material for crowns. The ceramic has been approved by the FDA for patient treatment.
- Conditions
- Fractured Tooth, Decayed Tooth, Unsatisfactory Restoration of Tooth
- Trial name
- NCT03036579
- Testing
- Celtra Duo
- Where
- United States
- Volunteers
- 73 people
- Sponsor
- University of Michigan
Missing Tooth
Lithium Disilicate (CAD/CAM) Fixed Partial Dentures (FPD) Clinical Study
This investigation will be a clinical trial to study the performance of a high strength ceramic material for bridges to replace missing teeth. The ceramic material has been approved by the FDA for patient treatment.
- Trial name
- NCT03036566
- Testing
- Lithium disilicate ceramic (Ivoclar)
- Where
- United States
- Volunteers
- 30 people
- Sponsor
- University of Michigan
Decay
Clinical Evaluation of Lava Digital Veneer System (DVS) Crowns
Study aim is to compare Lava Computer Aided Design / Computer Aided Milling Computer Aided Machining (CAD/CAM)crowns that are veneered (covered) with porcelain that has been milled using CAD/CAM, with similar CAD/CAM Lava crowns…
- Trial name
- NCT01278862
- Testing
- DVS veneer, Conventional Veneer
- Where
- United States
- Volunteers
- 77 people
- Sponsor
- Solventum US LLC
Osseointegration Failure of Dental Implant
Immediate Loading and Fully Guided Surgery: Single Implants
To evaluate the overall treatment outcome of single implants installed with the assistance of fully guided-surgery, submitted to immediate loading with restorations fabricated with the help of intraoral scanning, during a 1-year…
- Trial name
- NCT04061694
- Testing
- Immediate loading, fully guided surgery and 3D printed restoration, Immediate loading
- Where
- Sweden
- Volunteers
- 46 people, healthy volunteers welcome
- Sponsor
- Folktandvården Skåne AB
Partly Edentulous Maxilla
XiVE® CAD/CAM Bridges (Abutment-supported/ Implant-supported)
This study has been designed in order to collect data with regards to the peri-implant tissue outcome of abutment-supported restoration and direct implant-fixed restoration.
- Trial name
- XiCC (NCT01522365)
- Testing
- Abutment-supported XiVE CAD/CAM bridge, Implant-supported XiVE CAD/CAM bridge
- Where
- United Kingdom
- Volunteers
- 20 people
- Sponsor
- Dentsply Implants Manufacturing GmbH
Caries, Dental Trauma
Lithium Disilicate Crowns Study
CAD-CAM crowns made of experimental lithium disilicate (shades A1, A2 and A3) are placed in patients by using either a dual-curing adhesive or a self-adhesive luting material in combination with total etch/universal bonding agent.
- Trial name
- NCT05070416
- Testing
- Lithium disilicate crowns
- Where
- United States
- Volunteers
- 8 people
- Sponsor
- Ivoclar Vivadent AG
Fractured Tooth, Decayed Tooth
TetricCAD Crown Clinical Study
This investigation will be a clinical trial to study the performance of a new resin-based ceramic material for crowns. The material has been approved by the FDA for patient treatment.
- Conditions
- Fractured Tooth, Decayed Tooth, Unsatisfactory Restoration of Tooth
- Trial name
- NCT03716817
- Testing
- Tetric CAD
- Where
- United States
- Volunteers
- 50 people
- Sponsor
- University of Michigan
Coronary Artery Disease (CAD)
Testing Platelet Reactivity In Patients Undergoing Elective Stent Placement on Clopidogrel to Guide Alternative Therapy With Prasugrel (TRIGGER-PCI)
To determine the efficacy of prasugrel versus clopidogrel for the reduction of adverse cardiovascular outcomes in patients with high platelet reactivity on clopidogrel after successful implantation of coronary drug-eluting…
- Trial name
- TRIGGER-PCI (NCT00910299)
- Testing
- Prasugrel, Clopidogrel
- Where
- 27 sites in United States, Germany
- Volunteers
- 423 people
- Sponsor
- Eli Lilly and Company
Endodontically Treated Teeth
Alternative EndoCrowns Designs for Chairside CAD/CAM
This investigation will be a longitudinal clinical trial to study the association of preparation design on the internal and marginal adaptation of the resulting restorations and the long-term clinical performance of chairside…
- Trial name
- NCT04604314
- Testing
- CEREC Tessera
- Where
- United States
- Volunteers
- 69 people
- Sponsor
- University of Michigan