Clinical trials: CAD-CAM, open to volunteers
Endodontically Treated Molar
Comparison of the Clinical Performance of High Strength Hybrid Ceramic Indirect Restorations Cemented on Endodontically Treated Teeth Using Bioactive Versus Conventional Self Adhesive Resin Cements.
Cementation of indirect restoration is a determinant of the success or failure of the fabricated restoration and consequentially the entire tooth.
- Trial name
- NCT06787469
- Testing
- Resin Cement
- Volunteers
- 50 people
- Sponsor
- Cairo University
Prosthesis and Implant Dentistry
Passive Fit of Implant-Supported Complete-Arch Prostheses Using Digital Workflows
The goal of this clinical trial is to evaluate and compare three digital workflows for the fabrication of definitive implant-supported full-arch prostheses in adult patients requiring fixed implant rehabilitation.
- Trial name
- MFS03-Pdental (NCT07315620)
- Testing
- CBCT-STL Alignment Workflow, Splint-Guided Alignment Workflow, Automated AI-Assisted CBCT-STL Alignment Workflow
- Where
- Spain
- Volunteers
- 30 people
- Sponsor
- Universidad Complutense de Madrid
Tooth Loss
Allogenic Bone Block for Oro-Antral Communication Closure for Subsequent Implant Placement
13 patients will be included in this study with a badly destructed upper molar indicated for extraction. Cone beam computerized tomography images revealed the presence of a large bone defect associated with oro-antral…
- Trial name
- CAD-CAM (NCT07604142)
- Testing
- Extraction will be performed atraumatically using a piezotome surgical motor with an extraction kit
- Where
- Egypt
- Volunteers
- 13 people
- Sponsor
- Tanta University
Tooth Decay
Comparing the Clinical Success of Two Different CAD/CAM Full Cuspal Coverage Onlays
This is a single-center, ten-year, randomized controlled, split-mouth clinical trial. A total of 164 adult patients requiring full-cuspal coverage onlays will be enrolled.
- Trial name
- CUSTOM (NCT07519382)
- Testing
- full cuspal covarage onlay
- Where
- Hungary
- Volunteers
- 164 people
- Sponsor
- Semmelweis University
Hyaluronic Acid (HA)
A Comparative Clinical Assessment of Adjunctive Hyaluronic Acid With 3D Printed Versus Milled CAD CAM Provisional Dental Restorations on Active Periodontal Status and Surface Roughness and Biocompatibility
A Comparative Clinical Assessment of Adjunctive Hyaluronic Acid with 3D Printed Versus Milled CAD CAM Provisional Dental Restorations on active Periodontal status and Surface Roughness and biocompatibility (A Randomized…
- Trial name
- NCT07625839
- Testing
- commonly used hyaluronic Acid with both procedures 3D Printed Versus Milled CAD CAM Provisional Dental Restorations
- Volunteers
- 60 people, healthy volunteers welcome
- Sponsor
- Cairo University
Palatal Expansion Technique
Evaluation of Hard and Soft Tissue Change During Maxillary Expansion Using a Computer-aided Design / Computer-aided Manufacturing Appliance.
Hard tissue changes during the transversal expansion of the maxilla using a CAD/CAM expansion appliance. Soft tissue changes during the transversal expansion of the maxilla using a CAD/CAM expansion appliance.
- Trial name
- NCT06246656
- Testing
- Maxillary Expansion
- Where
- Austria
- Volunteers
- 38 people, healthy volunteers welcome
- Sponsor
- Medical University of Vienna
Endodontically Treated Molar, Dental Restoration, Permanent
3D Printed Ceramic-Filled Photopolymer Resin Vs. CAD/CAM Resin Composite Overlays for Restoration of Extensively Damaged Endodontically Treated Posterior Teeth. An 18-month Follow-up
II. Introduction: 6. Background and rationale: Restoring badly mutilated teeth was and has always been a challenge in restorative dentistry.
- Trial name
- 3D CAD/CAM RCT (NCT07378982)
- Testing
- 3D printed overlay restorations, CAD/CAM restorations
- Where
- Egypt
- Volunteers
- 32 people
- Sponsor
- Cairo University
Class II Malocclusion, Mandibular Deficiency
Dentoskeletal Effects of 3D-Printed Fixed Twin Block Versus MARA Appliances in Management of Skeletal Class II
Objective: to evaluate the dentoskeletal effects of CAD/CAM 3D-Printed fixed twin block versus MARA appliances in the management of skeletal class II due to Mandibular Deficiency in Preadolescence Class II malocclusion is…
- Trial name
- NCT07340242
- Testing
- MARA appliance, fixed twin block
- Where
- Egypt
- Volunteers
- 60 people
- Sponsor
- Mansoura University
Orthodontic Retainers
Comparison Between CAD/CAM and Conventional Mandibular Fixed Retainers.
The devices compared in this study are 'retainers', i.e. fixed orthodontic retainers applied to the lingual surface of the central and lateral incisors and lower canines bilaterally.
- Trial name
- NCT06529601
- Testing
- CAD/CAM mandibular fixed retainer, Conventional mandibular fixed retainer
- Where
- Italy
- Volunteers
- 54 people
- Sponsor
- Azienda Ospedaliero-Universitaria Careggi
Tooth Demineralization, Tooth Sensitivity
Graphene-Reinforced CAD/CAM Restorations for MIH-Affected Molars in Adolescents: A Prospective Clinical Study
This study evaluates the clinical performance, marginal integrity, surface wear, color stability, and postoperative sensitivity of graphene-reinforced CAD/CAM indirect restorations (inlays, onlays, overlays) in molars affected by…
- Conditions
- Tooth Demineralization, Tooth Sensitivity, Enamel Mineralization Disorders, Tooth Sensitivity After Composite Restorations
- Trial name
- NCT07329244
- Testing
- Graphene-reinforced CAD/CAM polymer (G-CAM®)
- Where
- Spain
- Volunteers
- 30 people
- Sponsor
- Universitat Internacional de Catalunya
Transverse Maxillary Deficiency
Digital vs. Analog Inputs in CAD/CAM Orthodontics: A Comparative Clinical Evaluation of Palatal Expander Fabrication Workflow
36 patients with unilateral or bilateral cross bite treated with hyrax expanders fabricated through three distinct workflows: fully conventional (physical impression + manual fabrication), hybrid (physical impression + CAD/CAM…
- Trial name
- NCT07338591
- Where
- 2 sites in Egypt
- Volunteers
- 36 people
- Sponsor
- Mansoura University
Root Canal Infection, Tooth Defect
Clinical Trial of Modified Endocrown and Personalized Post-core and Crown for Large-area Tooth Defects After Root Canal Treatment
This study intends to adopt a multicenter, randomized controlled, single-blind, non-inferiority clinical trial design. 246 premolars that meet the inclusion criteria after complete root canal treatment will be selected from the…
- Conditions
- Root Canal Infection, Tooth Defect, Post and Core Technique
- Trial name
- NCT07206108
- Testing
- modified endocrown
- Where
- China
- Volunteers
- 246 people, healthy volunteers welcome
- Sponsor
- Nanfang Hospital, Southern Medical University
Edentulism, Dental Implants
Accuracy of the Calibrated Framework for Intra Oral Full Arch Scan (A Cross-over Study)
This crossover clinical trial aims to compare the accuracy of conventional splinted open-tray implant impressions with intraoral digital scanning using a calibrated framework in completely edentulous patients rehabilitated with…
- Trial name
- NCT07858682
- Testing
- Conventional Splinted Open-Tray Implant Impression, Intraoral Digital Scanning Using a Calibrated Framework
- Where
- Egypt
- Volunteers
- 20 people
- Sponsor
- Mansoura University
Tooth Loss, Dentin Caries
PMCF Study on The Performance and Safety of ON DENT® PMMA Discs/Blocks and Resin Products for Temporary Restorations
This prospective, single-center, interventional post-market clinical follow-up (PMCF) study aims to evaluate the clinical performance and safety of temporary crown and bridge restorations fabricated using CE-marked ON DENT™…
- Conditions
- Tooth Loss, Dentin Caries, Tooth Fractures
- Trial name
- NCT07632443
- Testing
- Temporary Fixed Prosthesis (Tempo-CAD Monocolor PMMA), Temporary Fixed Prosthesis (Tempo-CAD Monocolor SHT PMMA), Temporary Fixed Prosthesis (Tempo-CAD Multicolor SHT PMMA)
- Where
- Turkey (Türkiye)
- Volunteers
- 120 people
- Sponsor
- On Dent Tibbi Malzeme Dis Protez Ith. ve Ihr. San. Ltd. Sti.
Dental Implants, Single-Tooth, Dental Implant-Abutment Design
Effect of Abutment Configuration on Peri-implant Soft and Hard Tissue in the Esthetic Zone - Randomized Clinical Trial
The aims of our study are to investigate in patients with immediate implantation replacing a single tooth in the maxillary anterior (#FDI 15-25) region the effect of (a) custom vs cylindrical stock healing abutments, then (b)…
- Trial name
- NCT06407271
- Testing
- CAD/CAM custom ZrO2 healing abutment, Cylindrical ZrO2 healing abutment
- Where
- Hungary
- Volunteers
- 30 people, healthy volunteers welcome
- Sponsor
- Semmelweis University
Tooth, Nonvital, Dental Restoration
Additive vs Subtractive Manufacturing for Endocrown Fabrication: A 24-Month RCT
This randomized controlled trial (RCT) compares the 24-month clinical performance of endocrown restorations fabricated by two digital manufacturing pathways: additive manufacturing using 3D-printed ceramic-filled photopolymer…
- Conditions
- Tooth, Nonvital, Dental Restoration, Endodontically Treated Teeth
- Trial name
- ENDO-3D (NCT07633574)
- Testing
- CAD/CAM Milled HC Hard Block Endocrown, 3D-Printed VarseoSmile TriniQ Endocrown
- Volunteers
- 60 people
- Sponsor
- Cairo University