Clinical trials: Dentures
Denture Retention
A Clinical Study to Evaluate the Maximum Maxillary Bite Force (BF) When Using Two Novel Denture Adhesives Compared to Using No-Adhesive
The purpose of this study is to investigate the hold properties of two experimental denture adhesives using established maximum incisal BF methodology.
- Trial name
- NCT05173974
- Testing
- Super Poligrip Free, Experimental Denture Adhesive 1, Experimental Denture Adhesive 2
- Where
- United States
- Volunteers
- 45 people, healthy volunteers welcome
- Sponsor
- HALEON
Denture Retention
Evaluation of a Experimental Denture Adhesive to Prevent Food Ingress
In this clinical study, an experimental denture adhesive with a precision tip nozzle was tested to evaluate the relative efficacy to reduce the ingress of food under the denture compared to use of no adhesive or a standard…
- Trial name
- NCT02928380
- Testing
- Experimental Denture Adhesive, Reference (Marketed) Denture Adhesive
- Where
- United States
- Volunteers
- 83 people, healthy volunteers welcome
- Sponsor
- GlaxoSmithKline
Denture Stomatitis
The Effectiveness of Palatal Brushing on Denture Stomatitis
Denture stomatitis (DS) is an oral biofilm associated inflammatory disease of the palatal mucosa. It is the most prevalent oral disease and the main indicator of poor oral health among denture wearers, affecting one-third of all…
- Trial name
- NCT02686632
- Testing
- Palatal brushing
- Where
- Canada
- Volunteers
- 52 people, healthy volunteers welcome
- Sponsor
- Université de Montréal
Implant Supported Overdenture, Wear, Occlusal
Clinical Evaluation of Conventional and 3D-printed Implant-supported Overdentures Retained With New Attachment Systems
Randomized Crossover Clinical Trial Comparing Two Denture Designs (A and B) Retained by Two Locator Systems (ST and EMI) in Implant Overdenture Patients
- Trial name
- IODs (NCT07580534)
- Testing
- Crossover Assignment
- Where
- Egypt
- Volunteers
- 20 people
- Sponsor
- Al-Azhar University
Edentulous
Comparing Patient Satisfaction & Stress Distribution on Mandibular Ridge by Three Posterior Occlusal Scheme in Complete Denture
In this randomized clinical trial to compare the patients' satisfaction of complete dentures with different occlusal forms, after simple randomized sampling of 15 participant that will be signed informed consent and their latest…
- Trial name
- NCT01493232
- Testing
- buccalized occlusion
- Where
- Iran
- Volunteers
- 15 people, healthy volunteers welcome
- Sponsor
- Isfahan University of Medical Sciences
Stomatitis
Effectiveness of Hygiene Solutions on Denture Biofilm
This clinical trial evaluated Ricinus communis and sodium hypochlorite solutions in different concentrations for denture cleanliness, regarding biofilm removal capacity, remission of atrophic chronic candidiasis, degree of…
- Trial name
- NCT02407834
- Testing
- S1, S2, S3
- Volunteers
- 64 people, healthy volunteers welcome
- Sponsor
- University of Sao Paulo
Complete Edentulism
Simplified Versus Conventional Complete Dentures
The purpose of this randomized, double-blind, 2-period crossover trial was to assess the satisfaction of edentulous patients and their oral health impact profile when provided with complete dentures fabricated using the…
- Trial name
- NCT05069909
- Testing
- Denture Fabrication technique
- Where
- Jordan
- Volunteers
- 40 people, healthy volunteers welcome
- Sponsor
- University of Jordan
Sleep Apnea, Obstructive
The Effect of Nocturnal Wear of Dentures on Sleep and Oral Health Related Quality of Life
Tooth loss and sleep problems are common conditions in elders. Tooth loss can influence sleep quality by changing the shape of the lower face and upper airway.
- Trial name
- NCT01868295
- Testing
- Sleeping with denture
- Where
- Canada
- Volunteers
- 70 people, healthy volunteers welcome
- Sponsor
- Université de Montréal
Dental Implants, Single-Tooth, Dental Impression Technique
Digital vs Conventional Impression in Capturing the Emergence Profile Around Maxillary Anterior Implant-supported Crowns
This study compares conventional impression and cast fabrication to direct/indirect digital scannig and 3D printed casts regarding their accuracy in replicating the peri-implant emergence profile of single implants in the…
- Trial name
- NCT06425770
- Testing
- indirect digital impression and 3D printed cast, direct digital impression, conventional impresion and cast
- Where
- Hungary
- Volunteers
- 15 people, healthy volunteers welcome
- Sponsor
- Semmelweis University
Edentulous
The Treatment of Implant-retained Mandibular Overdentures for Edentulous Patients
The purpose of this study is to investigate to what extent IOs improve the functionality of edentulous patients and changes in quality of life and overall patient satisfaction following treatment with IOs.
- Trial name
- TIMOEP (NCT02846805)
- Testing
- implant-retained overdentures
- Where
- China
- Volunteers
- 53 people, healthy volunteers welcome
- Sponsor
- Chufan Ma
Retentive Strength of Denture Adhesives
Retentive Strength of Denture Adhesives on Various RR Ridges
To compare the retentive strength of different form of commercially available denture adhesives (paste, powder and cushion) on different form of residual ridges.
- Trial name
- NCT05063422
- Testing
- polymyxin b/trimethoprim ophthalmic, Carboxymethyl cellulose
- Where
- Pakistan
- Volunteers
- 24 people, healthy volunteers welcome
- Sponsor
- Altamash Institute of Dental Medicine
Quality of Life
Quality of Life After Denture Relining
Purpose: the aim of the present study was to analyze the impact of mandibular denture relining with soft or hard denture liners in the oral health related quality of life (OHRQoL) of edentulous patients.
- Trial name
- OHRQoL (NCT01928706)
- Testing
- Denture liner Mucopren Soft; Group 1, Denture liner Kooliner; Group 2
- Where
- Brazil
- Volunteers
- 44 people, healthy volunteers welcome
- Sponsor
- Fundação de Amparo à Pesquisa do Estado de São Paulo
Prosthesis User
Clinical Performance of 3D-Printed Resin and Zirconia Implant Restorations
This randomized controlled clinical trial evaluates the clinical performance of 3D-printed resin restorations compared with milled monolithic zirconia in implant-supported single crowns and short-span fixed partial dentures…
- Trial name
- NCT07522671
- Testing
- 3D-Printed Resin Restoration (CROWNTEC)
- Where
- Egypt
- Volunteers
- 60 people
- Sponsor
- Menoufia University
Missing Teeth
Single-retainer Lithium Di-silicate Versus Zirconia Resin Bonded Bridge for Replacement of an Anterior Missing Tooth.
First, Participants in this study will be recruit according to inclusion criteria. Proper examination for the participants (clinically and radiographically). Preparation for abutment tooth for Resin bonded fixed partial denture.
- Trial name
- RBFPD (NCT05861921)
- Testing
- Single-retainer Lithium Di-silicate Resin Bonded Fixed Partial Denture
- Where
- Egypt
- Volunteers
- 44 people, healthy volunteers welcome
- Sponsor
- Cairo University
Periodontal Disease, Caries
The Effects of Chlorhexidine/Thymol Varnish on Partial Denture Patient
Cervitec, a chlorhexidine based varnished has been proven to reduce caries risk in younger populations. This study wants to investigate if the use of this product would reduce the risk of losing abutment teeth on patients that…
- Trial name
- NCT02202304
- Testing
- Chlorhexidine/Thymol varnish
- Where
- United Kingdom
- Volunteers
- healthy volunteers welcome
- Sponsor
- Rosa Moreno Lopez
Complete Denture
Patient Satisfaction and Retention of Upper Complete Denture Base Using Rapid Prototyping Versus a Conventional One
Comparing patient satisfaction and retention of upper complete denture fabricated using two different denture base materials, the first fabricated using rapid prototyping method while the second is following conventional methods.
- Trial name
- NCT03354715
- Testing
- Rapid prototyping Denture base, Heat Cured Conventional Complete Denture
- Where
- Egypt
- Volunteers
- 16 people
- Sponsor
- Cairo University
Partial Edentulism, Partial Edentulism Class 1
Surface Wear of PEEK Clasp Against Zirconia Full-Coverage Restored Abutments in Distal Extension Removable Partial Dentures
This prospective clinical comparative study will evaluate the surface wear of BioHPP (modified polyetheretherketone) clasps opposing either natural tooth abutments or zirconia full-coverage abutments in mandibular bilateral…
- Trial name
- PEEKWear (NCT07708558)
- Testing
- PEEK Removable Partial Denture Framework with Natural Tooth Abutments, PEEK Removable Partial Denture Framework with Zirconia Abutments
- Where
- Egypt
- Volunteers
- 10 people
- Sponsor
- Mansoura University
Dental Plaque, Denture Stomatitis
Efficacy of a Propolis-based Denture Cleanser
The purpose of this study is to assess if a propolis solution is able to remove plaque and kill microbes from complete dentures.
- Conditions
- Dental Plaque, Denture Stomatitis, Oral Candidiasis, Oral Hygiene
- Trial name
- NCT01237782
- Testing
- Denture soaking solution, Saline solution
- Where
- Brazil
- Volunteers
- 30 people, healthy volunteers welcome
- Sponsor
- Raphael Freitas de Souza
Mouth, Edentulous
Conventionally vs. Digitally Fabricated Complete Dentures: Clinical Treatment Outcome Differences
Purpose: To compare complete denture outcomes between conventional and digital denture fabrication processes. Participants: Sixteen edentulous adult patients in the University of North Carolina School of Dentistry Student Clinic…
- Trial name
- NCT02521935
- Testing
- Complete traditional dentures, Complete CADCAM dentures
- Where
- United States
- Volunteers
- healthy volunteers welcome
- Sponsor
- University of North Carolina, Chapel Hill
Deep Caries Lesion of Pemanent Teeth
Adjustment Period for Partial Crowns
The aim of this study is to compare the occlusal accuracy of CAD/CAM milled and 3D printed crowns guided by an occlusal device, starting from the same digital CAD design.
- Trial name
- Adjustment per (NCT07051590)
- Testing
- cad cam, 3D printer
- Where
- Turkey (Türkiye)
- Volunteers
- 20 people
- Sponsor
- Ceren Sire