Clinical trials: CAD/CAM
Orthodontic Appliances, Adverse Effects,Gingivitis, Dental Plaque, Periodontal Diseases
Digital Manufacturing and Periodontal Performance of CAD/CAM-Customized Orthodontic Molar Bands Compared With Standard Stainless-Steel Bands
his prospective randomized clinical trial aimed to compare periodontal outcomes associated with CAD/CAM-customized orthodontic molar bands and conventional preformed stainless-steel molar bands in adolescents undergoing fixed…
- Trial name
- NCT07526805
- Testing
- Stainless-Steel Orthodontic Molar Bands
- Where
- Romania
- Volunteers
- 180 people
- Sponsor
- Dimitrie Cantemir University
Transverse Maxillary Deficiency
Digital vs. Analog Inputs in CAD/CAM Orthodontics: A Comparative Clinical Evaluation of Palatal Expander Fabrication Workflow
36 patients with unilateral or bilateral cross bite treated with hyrax expanders fabricated through three distinct workflows: fully conventional (physical impression + manual fabrication), hybrid (physical impression + CAD/CAM…
- Trial name
- NCT07338591
- Where
- 2 sites in Egypt
- Volunteers
- 36 people
- Sponsor
- Mansoura University
CAD/CAM Space Maintainer
"Evaluation of Clinical Performance and Success Rate of CAD/CAM Versus Conventional Band and Loop Space Maintainer"
This study is to evaluate and compare CAD/CAM zircon space maintainer and conventional metal of band and loop space maintainers in terms of plaque deposits and gingival health and, the success rate of the appliances in terms of…
- Trial name
- NCT05134714
- Testing
- CAD/CAM zircon band and loop space maintainer, Conventional metal band and loop space maintainer
- Volunteers
- 18 people, healthy volunteers welcome
- Sponsor
- Ain Shams University
Tooth Loss, Dental Implant
A 36-month Analysis of the Clinical Performance of Individualized CAD/CAM-produced Dental Implants: a Cohort Study
The goal of this prospective cohort study is to evaluate the clinical performance of a new generation of customized CAD/CAM pre-fabricated root-analog dental implants over a 36-month period.
- Trial name
- NCT06576284
- Where
- Brazil
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- University of Sao Paulo
Endodontic Treatment, Tooth Restoration
Endodontic Posts Using the CAD/CAM Digital Method.
This study investigates the survival and success rates of endodontic posts exclusively fabricated using the CAD/CAM digital method over a period of 5 years of intraoral use.
- Trial name
- NCT07297108
- Testing
- Lithium Disilicate CAD/CAM Post, Active Comparator: Polymer-Based CAD/CAM Posts
- Where
- Greece
- Volunteers
- 80 people, healthy volunteers welcome
- Sponsor
- Aristotle University Of Thessaloniki
Dental Caries in Children
Digital Crowns Versus Prefabricated Crowns on Primary Teeth
Badly decayed primary molars will be treated by performing the pulp therapy technique indicated, then the patients will be randomized into two groups to receive the restorative intervention.
- Trial name
- NCT06305845
- Testing
- Digital crowns, zirconia crowns
- Where
- Egypt
- Volunteers
- 58 people
- Sponsor
- National Research Centre, Egypt
Modified Fixed Bridge
3D Printed vs CAD/CAM Rehabilitation of Primary Anterior Teeth Loss
compare 3D Printed versus CAD/CAM fabricated modified fixed appliance for rehabilitation of premature loss of anterior teeth in preschool children
- Trial name
- NCT07752147
- Testing
- 3D Printed modified fixed bridge, CAD/CAM fabricated modified fixed bridge
- Where
- Egypt
- Volunteers
- 40 people
- Sponsor
- Tanta University
Occlusion, Prosthesis Durability
Abutment Analysis of Metallic Denture Frameworks in Mandibular Kenedy Class III Cases
This study is aimed to compare CAD/CAM (digitally fabricated) metallic partial denture frameworks to conventionally fabricated metallic partial denture frameworks in mandibular Kennedy class-III arches in terms of abutment health…
- Trial name
- NCT07215208
- Testing
- CAD/CAM metallic partial denture frameworks, Conventional metallic partial denture frameworks
- Volunteers
- 22 people, healthy volunteers welcome
- Sponsor
- Cairo University
Molar Incisor Hypomineralization
Comparing CAD/CAM vs Composite for Carious Hypomineralized Molars Evaluating Clinical Outcomes of Both Treatments.
Molar Incisor Hypomineralization (MIH) is enamel hypomineralization defined as qualitative defects caused by disruptions in either the calcification or maturation phases of amelogenesis affecting one or more first permanent…
- Trial name
- NCT07049016
- Testing
- restoring the MIH affected young permanent molars using Direct nanohybrid flowable composite, restoring the MIH affected young permanent molars using IPS e.max CAD
- Where
- Egypt
- Volunteers
- 72 people, healthy volunteers welcome
- Sponsor
- October University for Modern Sciences and Arts
Caries of Infancy
Clinical Evaluation of Polymethyl Methacrylate CAD/CAM Crowns Versus Prefabricated Zirconia Crowns in Primary Molars
, in this studythe investigator will compare between ready-made zirconia crowns and Computer-aided design and Computer-aided manufacturing (CAD/CAM) polymethyl methacrylate (PMMA) crowns to overcome the disadvantages of…
- Trial name
- NCT06113770
- Testing
- preparation of the tooth to receive ready made zirconia crown, preparation of the tooth to receive CAD CAM PMMA custom made crown
- Where
- Egypt
- Volunteers
- 17 people, healthy volunteers welcome
- Sponsor
- Adel Sherif Mostafa Rehab
CAD/CAM Space Maintainer, 3D Printing
Evaluation of Clinical Wear and Surface Roughness of Partial Restorations Produced by Additive and Subtractive Manufacturing Methods: A Split-Mouth Randomized Controlled Clinical Trial
The aim of this study is to compare the surface roughness and wear values of crowns fabricated using currently utilized 3D printing and CAD-CAM technologies.
- Conditions
- CAD/CAM Space Maintainer, 3D Printing, Dental Treatment, Dental Disease
- Trial name
- NCT07057401
- Testing
- CAD-CAM Manufactured Crowns, 3D Printed Crowns
- Where
- Turkey (Türkiye)
- Volunteers
- 30 people
- Sponsor
- Husna Selinay
Relapse
CAD/CAM Fixed Retainers vs. Conventional Multistranded Fixed Retainers in Orthodontic Patients. Comparison of Stability, Retainer Failure Rate, Adverse Effects, Cost-effectiveness, and Patient Satisfaction. A Randomized Controlled Clinical Trial
Introduction: Orthodontic retainers are used after the completion of orthodontic treatment to assure dental occlusal stability and to maintain the achieved end-result.
- Trial name
- Retention (NCT04389879)
- Testing
- Bonding of either CAD/CAM or conventional multistranded stainless steel fixed retainer
- Where
- 2 sites in Denmark, Norway
- Volunteers
- 126 people, healthy volunteers welcome
- Sponsor
- University of Aarhus
Restoration of Primary Molars With CAD/CAM Crowns
Primary Molars Restoration Using Different Pediatric Crowns.
study aims to compare hybrid ceramic CAD/CAM and prefabricated zirconia ans stainless steel crowns restoring primary molars through In-vivo evaluation of the clinical outcomes in terms of; crown retention, stain resistance and…
- Trial name
- NCT04144062
- Testing
- CAD/CAM crowns
- Where
- Egypt
- Volunteers
- 100 people, healthy volunteers welcome
- Sponsor
- Nehal Salman
Dental Caries, Cavity, Dental
Clinical Performance of CAD/CAM Hard Hybrid Ceramic Inlays Versus Resin Composite Inlays in Vital Molars With Extensive Occluso-Proximal Cavities
this study aims to compare the clinical performance of hard hybrid ceramics and composite resin indirect restorations fabricated by CAD/CAM technology for the vital teeth with occluso-proximal cavities.
- Conditions
- Dental Caries, Cavity, Dental, Proximal Dental Caries
- Trial name
- NCT07648485
- Testing
- hybrid ceramics, Composite resin
- Volunteers
- 50 people
- Sponsor
- Cairo University
Lefort I Osteotomy
Waferless One Stage Segmental Lefort I Maxillary Positioning in Transverse Deficiency
In Maxillary transverse deficiency, is waverless lefort I multiple pieces osteotomy using virtually planned patient specific titanium implants feasible and does it provide accuracy? This prospective case series study evaluating…
- Trial name
- NCT03884699
- Testing
- Accuracy of planned transverse Maxillary distance using Mimics software after fixation using Patient specific implant
- Volunteers
- 6 people, healthy volunteers welcome
- Sponsor
- Cairo University
Denture, Complete, Jaw, Edentulous
Milled Versus Printed CAD/CAM Complete Dentures
A crossover clinical trial investigates two novel CAD/CAM techniques for complete removable dental prostheses for edentulous patients, milling and rapid prototyping (3D-printing) in a clinical setting of an undergraduate student…
- Trial name
- MILLPRINT (NCT04873219)
- Testing
- manufacturing a complete dental prosthesis
- Where
- Switzerland
- Volunteers
- 15 people, healthy volunteers welcome
- Sponsor
- University of Geneva, Switzerland
Edentulous, Jaw
Passive Fit of CAD/CAM Screw-retained Metal Frameworks Versus Screwmented Ones
CAD/CAM (computer aided design/ computer aided manufacturing) constructed screw retained implant supported frameworks give solutions for the problems arising from the lost wax technique by improving accuracy, adaptation and…
- Trial name
- NCT04372901
- Testing
- Digitally constructed frameworks before implant placement, Digitally constructed frameworks after implant placement
- Where
- Egypt
- Volunteers
- 8 people, healthy volunteers welcome
- Sponsor
- Cairo University
Maxillary Tumors
Aesthetic Reconstruction of Onco-surgical Maxillary Defects Using FSF With and Without CAD/CAM Customized Cutting Guide
The aim of the study is to compare aesthetic results and operation time of Free Scapular flap with and without CAD/CAM customized osteotomy guide for reconstruction of maxillary Defects.
- Trial name
- NCT03757286
- Testing
- FSF with CAD\CAM customized cutting guide, FSF without customized cutting guide
- Where
- Egypt
- Volunteers
- 22 people
- Sponsor
- Cairo University
Tooth Stability, Periodontal Health
Clinical Effectiveness of Cobalt Chromium CAD-CAM Designed Customized Lingual Retainer
This study aims to evaluate the clinical effectiveness of CAD/CAM 3D printed Chrome Cobalt fixed retainer in maintaining mandibular anterior teeth stability.
- Conditions
- Tooth Stability, Periodontal Health, Patient Satisfaction
- Trial name
- NCT06837168
- Testing
- Stainless steel fixed retainer, 3D printed CAD/CAM Chrome cobalt fixed lingual retainers
- Where
- Iraq
- Volunteers
- 42 people
- Sponsor
- University of Baghdad
Mandibular Injuries
Accuracy and Outcome of Computer-assisted Surgery for Bony Micro-vascular Reconstruction in the Head and Neck Region
Background: Functional and aesthetic reconstruction of mandibular defects due to tumour invasion, osteoradio- or chemonecrosis or trauma are challenging.
- Trial name
- NCT03054012
- Volunteers
- 30 people
- Sponsor
- AZ Sint-Jan AV