Clinical trials: CAD-CAM
Orthodontic Appliances, Fixed
Computer-aided Indirect Bonding Versus Traditional Direct Bonding of Brackets in Orthodontic Patients
Accurate bracket positioning is one of the keys for effective orthodontic treatment. Traditionally, orthodontic brackets are positioned one-by-one on the teeth of the patient, with the so-called direct bonding method.
- Trial name
- NCT04395625
- Testing
- Direct bonding of Orthodontic brackets, Indirect bonding of Orthodontic brackets
- Volunteers
- 37 people, healthy volunteers welcome
- Sponsor
- University of Aarhus
Relapse
CAD/CAM Fixed Retainers vs. Conventional Multistranded Fixed Retainers in Orthodontic Patients. Comparison of Stability, Retainer Failure Rate, Adverse Effects, Cost-effectiveness, and Patient Satisfaction. A Randomized Controlled Clinical Trial
Introduction: Orthodontic retainers are used after the completion of orthodontic treatment to assure dental occlusal stability and to maintain the achieved end-result.
- Trial name
- Retention (NCT04389879)
- Testing
- Bonding of either CAD/CAM or conventional multistranded stainless steel fixed retainer
- Where
- 2 sites in Denmark, Norway
- Volunteers
- 126 people, healthy volunteers welcome
- Sponsor
- University of Aarhus
Lefort I Osteotomy
Waferless One Stage Segmental Lefort I Maxillary Positioning in Transverse Deficiency
In Maxillary transverse deficiency, is waverless lefort I multiple pieces osteotomy using virtually planned patient specific titanium implants feasible and does it provide accuracy? This prospective case series study evaluating…
- Trial name
- NCT03884699
- Testing
- Accuracy of planned transverse Maxillary distance using Mimics software after fixation using Patient specific implant
- Volunteers
- 6 people, healthy volunteers welcome
- Sponsor
- Cairo University
Speech, Denture, Partial, Removable
Intelligibility and Acoustic Speech Performance of CAD/CAM Milled Titanium Partial Dentures
Partial dentures play a crucial role in restoring oral function and aesthetics for patients with missing teeth. Traditionally, these prostheses have been fabricated using materials such as acrylic resin or cobalt-chromium alloys.
- Conditions
- Speech, Denture, Partial, Removable, CAD-CAM
- Trial name
- NCT06589570
- Testing
- Removable Partial Denture
- Where
- Egypt
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- Badr University
CAD/CAM Space Maintainer, 3D Printing
Evaluation of Clinical Wear and Surface Roughness of Partial Restorations Produced by Additive and Subtractive Manufacturing Methods: A Split-Mouth Randomized Controlled Clinical Trial
The aim of this study is to compare the surface roughness and wear values of crowns fabricated using currently utilized 3D printing and CAD-CAM technologies.
- Conditions
- CAD/CAM Space Maintainer, 3D Printing, Dental Treatment, Dental Disease
- Trial name
- NCT07057401
- Testing
- CAD-CAM Manufactured Crowns, 3D Printed Crowns
- Where
- Turkey (Türkiye)
- Volunteers
- 30 people
- Sponsor
- Husna Selinay
Tooth Wear
Survival and Success of CAD/CAM Restorations After 5 Years of Intraoral Use
This study evaluates the survival and success rates of dental restorations fabricated exclusively using CAD/CAM technology over a period of 5 years.
- Trial name
- NCT07276269
- Testing
- CAD/CAM Digital Restoration Placement, Study of the Survival and Success of Endodontic Posts Using the CAD/CAM Digital Method After 5 Years of Intraoral Use
- Where
- Greece
- Volunteers
- 80 people, healthy volunteers welcome
- Sponsor
- Aristotle University Of Thessaloniki
Restoration of Primary Molars With CAD/CAM Crowns
Primary Molars Restoration Using Different Pediatric Crowns.
study aims to compare hybrid ceramic CAD/CAM and prefabricated zirconia ans stainless steel crowns restoring primary molars through In-vivo evaluation of the clinical outcomes in terms of; crown retention, stain resistance and…
- Trial name
- NCT04144062
- Testing
- CAD/CAM crowns
- Where
- Egypt
- Volunteers
- 100 people, healthy volunteers welcome
- Sponsor
- Nehal Salman
Bone Defects
Treatment of Complex Ridge Defects With Custom Meshes
Brief introduction: After tooth extraction, alveolar defects may hinder implant placement. Digital imaging and CAD/CAM advances allow creation of patient-specific titanium meshes for effective bone augmentation.
- Trial name
- NCT07268456
- Where
- Turkey (Türkiye)
- Volunteers
- 15 people
- Sponsor
- TC Erciyes University
Orthodontic Appliances, Adverse Effects,Gingivitis, Dental Plaque, Periodontal Diseases
Digital Manufacturing and Periodontal Performance of CAD/CAM-Customized Orthodontic Molar Bands Compared With Standard Stainless-Steel Bands
his prospective randomized clinical trial aimed to compare periodontal outcomes associated with CAD/CAM-customized orthodontic molar bands and conventional preformed stainless-steel molar bands in adolescents undergoing fixed…
- Trial name
- NCT07526805
- Testing
- Stainless-Steel Orthodontic Molar Bands
- Where
- Romania
- Volunteers
- 180 people
- Sponsor
- Dimitrie Cantemir University
Dental Crowns, Orthodontics, Interceptive
Clinical Outcomes of Functional Space Maintainers Designed Using CAD/CAM Technology in Early Loss of the First Primary Molar
As passive fixed space maintainers do not replace the lost tooth and therefore do not provide a chewing function, this study aims to evaluate the efficiency of an innovative solution for maintaining space after the premature…
- Conditions
- Dental Crowns, Orthodontics, Interceptive, Orthodontic Appliance
- Trial name
- KOS&MET (NCT06744153)
- Testing
- Space Maintainer
- Where
- Serbia
- Volunteers
- 28 people
- Sponsor
- Rasa Mladenovic
Skeletal Abnormalities
Condylar Segment Repositioning Using CAD/CAM Generated Wafer After BSSO in Skeletal Mandibular Deformity
Maintaining the condylar position after bilateral sagittal split ramus osteotomy (BSSO) is one of the most important aspects in terms of condylar function ,.An altered condylar position can cause internal derangement of the…
- Trial name
- NCT03983265
- Testing
- Bilateral Sagittal Split Osteotomy
- Where
- Egypt
- Volunteers
- 10 people, healthy volunteers welcome
- Sponsor
- Cairo University
Enamel Hypoplasia, Molar-Incisor Hypomineralization (MIH)
Clinical Comparison of CAD/CAM Nanohybrid Composite and Hybrid Ceramic Overlays in Children With Molar-Incisor Hypomineralisation
This clinical study was conducted to compare two different dental materials used in the treatment of children who have a condition called molar-incisor hypomineralization (MIH).
- Conditions
- Enamel Hypoplasia, Molar-Incisor Hypomineralization (MIH), Restoration of Permanent Molars Affected by MIH With CAD/CAM Blocks
- Trial name
- NCT06987448
- Testing
- Semi-direct onlay restoration using CAD/CAM hybrid composite block, Semi-direct onlay restoration using CAD/CAM hybrid ceramic block
- Where
- Turkey (Türkiye)
- Volunteers
- 20 people
- Sponsor
- Alp Akça
Denture, CAD/CAM
Effect of Certain Denture Disinfectants on Surface Topography, Microhardness and Dimensional Stability of CAD/CAM Milled Polymethyl Methacrylate and Polyether Ether Ketone Denture Base Materials
This study aims to evaluate and compare the influence of different denture cleansing methods using 1% sodium hypochlorite solution, 0.2% chlorhexidine solution and effervescent alkaline peroxide tablet solution -according to…
- Conditions
- Denture, CAD/CAM, Stability, PEEK
- Trial name
- NCT07672847
- Testing
- M0 group, M1 group : PMMA+ Sodium hypochlorite, M2 group: PMMA+ Chlorhexidine
- Where
- Egypt
- Volunteers
- 88 people
- Sponsor
- Menoufia University
Mandibular Tumors
Aesthetic Reconstruction of Onco-surgical Mandibular Defects Using FFF With and Without CAD/CAM Customized Cutting Guide
The purpose of this study is to compare Aesthetic results and operation time of free fibular flap with and without CAD/CAM customized osteotomy guide for reconstruction of mandibular defects.
- Trial name
- NCT03757273
- Testing
- FFF with CAD/CAM customized cutting guide, FFF without customized cutting guide
- Where
- Egypt
- Volunteers
- 22 people
- Sponsor
- Cairo University
Mouthguard Use, Orofacial Injuries Prevention
Impact of 3D-Printed and Custom Mouthguards on Speech and Oral Functions in Children Practicing Contact Sports
This study aims to compare the effects of traditional and 3D-printed custom-made mouthguards on speech and oral functions in pediatric cases who practice contact sports by evaluating the comfort, fit, and performance of both…
- Conditions
- Mouthguard Use, Orofacial Injuries Prevention, 3D Printed Mouthguard, Traditional Custom-made Mouthguard
- Trial name
- Mouthguards (NCT06972823)
- Testing
- 3D printed custom-made mouthguards, Traditional custom-made mouthguards
- Where
- Egypt
- Volunteers
- 60 people, healthy volunteers welcome
- Sponsor
- Cairo University
Occlusion, Prosthesis Durability
Abutment Analysis of Metallic Denture Frameworks in Mandibular Kenedy Class III Cases
This study is aimed to compare CAD/CAM (digitally fabricated) metallic partial denture frameworks to conventionally fabricated metallic partial denture frameworks in mandibular Kennedy class-III arches in terms of abutment health…
- Trial name
- NCT07215208
- Testing
- CAD/CAM metallic partial denture frameworks, Conventional metallic partial denture frameworks
- Volunteers
- 22 people, healthy volunteers welcome
- Sponsor
- Cairo University
Molar Hypomineralization, Dental Restoration Failure of Marginal Integrity
CAD-CAM or Adhesive Approaches for MIH Treatment
Aim: This randomized controlled clinical study aimed to compare direct composite resin restorations and Computer Aided Design-Computer Aided Manufacturing (CAD-CAM) supported inlay or onlay restorations in young permanent molar…
- Trial name
- NCT06456619
- Testing
- Tooth restoration
- Where
- Turkey (Türkiye)
- Volunteers
- 22 people, healthy volunteers welcome
- Sponsor
- Baskent University
Comparing Different Types of Restorations for Restoring Endodontically Treated Permanent First Molar in Children
Endocrown Restoring First Permanent Molar in Children
Clinical and radiographic evaluation of endodontically treated first permanent molars in thirty children restored with three different restorations over 12 months
- Trial name
- NCT06432049
- Testing
- restoration for endodontically treated molar
- Where
- Egypt
- Volunteers
- 30 people
- Sponsor
- Kafrelsheikh University
Complete Denture
Clinical Assessment of CAD/CAM Monolithic Complete Denture
The aim of the study is to evaluate trueness, tooth position, retention, and patient satisfaction of CAD/CAM monolithic complete denture
- Trial name
- NCT07091552
- Testing
- CAD/CAM monolithic denture, Conventional denture
- Where
- Egypt
- Volunteers
- 22 people
- Sponsor
- Eman Assam
Dental Caries, Cavity, Dental
Clinical Performance of CAD/CAM Hard Hybrid Ceramic Inlays Versus Resin Composite Inlays in Vital Molars With Extensive Occluso-Proximal Cavities
this study aims to compare the clinical performance of hard hybrid ceramics and composite resin indirect restorations fabricated by CAD/CAM technology for the vital teeth with occluso-proximal cavities.
- Conditions
- Dental Caries, Cavity, Dental, Proximal Dental Caries
- Trial name
- NCT07648485
- Testing
- hybrid ceramics, Composite resin
- Volunteers
- 50 people
- Sponsor
- Cairo University