Clinical trials: 3D Printing, open to volunteers
Liver Tumor; Surgery, 3D Printing
SH-LPS System in Preoperative Planning for Liver Resection
Effective preoperative planning and real-time intraoperative guidance are crucial for performing accurate liver resections. To address this need, the researchers have designed advanced 3D-printed liver models using a self-healing…
- Conditions
- Liver Tumor; Surgery, 3D Printing, Preoperative Planning
- Trial name
- NCT06911086
- Testing
- 3D printed models, CT or MRI image
- Volunteers
- 100 people
- Sponsor
- Zhejiang Cancer Hospital
Hearing Aids, Hearing Loss, Bilateral Sensorineural
Effectiveness Comparison of 3D-Printed and Conventional Ear Tip Comfort in Individuals With Hearing Loss
Access to affordable and timely hearing healthcare remains a major challenge for many individuals, partly due to the high cost and long turnaround time.
- Conditions
- Hearing Aids, Hearing Loss, Bilateral Sensorineural, 3D Printing
- Trial name
- NCT07228845
- Testing
- BTE hearing aids with compatible ear tips (Third-party, FlexResin, Resin), BTE hearing aids with compatible ear tips (FlexResin, Resin, Third-party, FlexResin), BTE hearing aids with compatible ear tips (Resin, Third-party, FlexRes)
- Where
- United States
- Volunteers
- 32 people
- Sponsor
- University of Arizona
Printed Dentures
Effect of Printing Layer Thickness on Growth of Candida Albicans in Completely Edentulous Patients Rehabilitated With 3D-Printed Maxillary Complete Denture Bases.
In completely edentulous patients rehabilitated with 3D-printed maxillary dentures bases, does the printing layer thickness affect candidal adherence and growth on the fitting surface of dentures.
- Trial name
- NCT07303530
- Testing
- printing layer thickness of denture
- Where
- 2 sites in Egypt
- Volunteers
- 10 people, healthy volunteers welcome
- Sponsor
- Cairo University
Orbital Fractures, Unilateral
Comparing Pre-adaptation of In-stock Mesh Over In-house 3D Patient Specific Model to Reconstruct Unilateral Primary Orbital Fracture With and Without Intraoperative Navigation vs Conventional Intraoperative Free-hand Mesh Bending
The investigators study the accuracy of repairing unilateral primary orbital fractures using a new technique, using 3D printed patient specific model to preoperative adapting of the readily available in sock titanium mesh, the…
- Conditions
- Orbital Fractures, Unilateral, Recent
- Trial name
- NCT07882121
- Testing
- 3D printed patient specific model, Conventional, Brainlab navigation system
- Where
- 2 sites in Egypt
- Volunteers
- 30 people
- Sponsor
- Ain Shams University
Endodontically Treated Teeth
Milled vs 3D-Printed Partial-Coverage Restorations in Endodontically Treated Molars
The goal of this clinical trial is to compare the clinical performance of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM)-milled and 3D-printed composite resin partial-coverage restorations in endodontically…
- Trial name
- NCT07643311
- Testing
- Milled Composite Resin Onlay/Overlay Restoration, 3D-Printed Composite Resin Onlay/Overlay Restoration
- Where
- Chile
- Volunteers
- 142 people
- Sponsor
- Hospital San Jose
Dental Prosthesis, Implant-Supported
Additively Versus Subtractively Manufactured Implant Supported Fixed Dental Prostheses
This research is being done to evaluate the clinical, technical, biological, and aesthetic results of two different fabrication methods (additive and subtractive) for creating implant-supported fixed dental prostheses (iFDPs).
- Trial name
- NCT07090863
- Testing
- AM manufacturing method, SM manufacturing method
- Where
- 2 sites in United States, Switzerland
- Volunteers
- 50 people
- Sponsor
- Harvard Medical School (HMS and HSDM)
Dental Health, Space Maintainer
Evaluation of Band-Loop Space Maintainers Produced With Three-Dimensional Printer and Conventional Technique
Our research is planned as a randomised clinical trial. The main aim of our study is to evaluate the clinical success of band and loop space maintainers produced by three-dimensional printer and conventional technique and the…
- Conditions
- Dental Health, Space Maintainer, Pediatric Dentistry, 3D Printing
- Trial name
- NCT06798090
- Testing
- Band and Loop Space Maintainer Produced with Three-Dimensional Printer, Band and Loop Space Maintainer Produced with Conventional Technique
- Where
- Turkey (Türkiye)
- Volunteers
- 27 people
- Sponsor
- Aydin Adnan Menderes University
Flexor Tendon Injury, Tendon Injury - Hand
Effects of Different Wrist Positions in Dorsal Blocking Orthoses After Flexor Tendon Repair
This randomized controlled study aims to compare the effects of three different wrist positions (30° extension, neutral, and 30° flexion) used in dorsal blocking orthoses during early active mobilization after zone I-II flexor…
- Trial name
- NCT07489235
- Testing
- 3D-Printed Dorsal Blocking Orthosis (wrist 30 degree extension), 3D-Printed Dorsal Blocking Orthosis (wrist neutral), 3D-Printed Dorsal Blocking Orthosis (wrist 30 degree flexion)
- Where
- Turkey (Türkiye)
- Volunteers
- 64 people
- Sponsor
- Sedanur Güngör
Edentulism Complete, Edentulism
PRINTOW: Occlusal Wear of Denture Teeth in Digitally Fabricated Complete Dentures
This randomized controlled trial evaluates the occlusal wear of denture teeth fabricated using three digital workflows: 3D-printed denture teeth, CAD/CAM-milled double cross-linked denture teeth, and prefabricated denture teeth.
- Trial name
- Printow (NCT07585162)
- Testing
- CAD/CAM-Milled Denture Base with Milled Denture Teeth, CAD/CAM-Milled Denture Base with Prefabricated Denture Teeth, 3D-printed denture base and teeth
- Volunteers
- 45 people
- Sponsor
- Najla Chebib
Complex Limb Bone Deformity, Limb Length Discrepancy
Multistage Additive Manufacturing for Complex Limb Bone Deformity Reconstruction
Complex deformities of the limb bones may involve abnormal angulation, limb or bone shortening, abnormal rotation and structural bone loss.
- Conditions
- Complex Limb Bone Deformity, Limb Length Discrepancy, Angular Deformity, Rotational Deformity
- Trial name
- MAP-BD (NCT07779278)
- Where
- China
- Volunteers
- 30 people
- Sponsor
- Peking University Third Hospital
Burn, 3D Printing
Clinical Effectiveness of a Patient-tailored Orthosis Based on 3-dimensional (3D) Scanner Modeling and 3D Printing Technology for Microstomia Caused by Burns : Pilot Study
Mircostomia is not clearly defined in terms of size, but is diagnosed when it causes difficulty in eating, pronounciation, or maintaining oral hygiene.
- Conditions
- Burn, 3D Printing, Microstomia, Split Thickness Skin Graft
- Trial name
- NCT07264218
- Testing
- patient's tailored mouthpiece fitting
- Where
- South Korea
- Volunteers
- 10 people
- Sponsor
- Hangang Sacred Heart Hospital
Endodontically Treated Molar, Dental Restoration, Permanent
3D Printed Ceramic-Filled Photopolymer Resin Vs. CAD/CAM Resin Composite Overlays for Restoration of Extensively Damaged Endodontically Treated Posterior Teeth. An 18-month Follow-up
II. Introduction: 6. Background and rationale: Restoring badly mutilated teeth was and has always been a challenge in restorative dentistry.
- Trial name
- 3D CAD/CAM RCT (NCT07378982)
- Testing
- 3D printed overlay restorations, CAD/CAM restorations
- Where
- Egypt
- Volunteers
- 32 people
- Sponsor
- Cairo University
Stroke, Stroke Rehabilitation
Evaluating Functional Outcomes of 3D-Printed Splints in Post-Stroke Upper Limb Recovery
This study aims to evaluate the upper limb motor recovery using a 3D-printed dynamic orthosis compared to a conventional one as part of a rehabilitation program in individuals with chronic stroke.
- Conditions
- Stroke, Stroke Rehabilitation, Hemiparesis of the Upper Limb Following Stroke
- Trial name
- 3D-splint (NCT07243314)
- Testing
- 3D Printed splint, conventional splint
- Where
- Saudi Arabia
- Volunteers
- 100 people
- Sponsor
- King Saud University
Hearing Aids, 3D Printing
Effectiveness Comparison of 3D-Printed and Conventional Ear Tip Comfort in Individuals With Hearing in the Normal Range
Access to affordable and timely hearing healthcare remains a major challenge for many individuals, partly due to the high cost and long turnaround time.
- Trial name
- NCT07216937
- Testing
- BTE hearing aid with compatible earmolds
- Where
- United States
- Volunteers
- 30 people, healthy volunteers welcome
- Sponsor
- University of Arizona
Abdominal Aortic Aneurysm, Juxtarenal Abdominal Aortic Aneurysm
Evaluation of Clinical Efficacy and Safety of Aortal Stent-Graft Created Using 3D Printing Technology
the comparison of physician-modified stent-graft created in 3D models versus custom-made devices in the treatment of complex abdominal aortic aneurysm
- Conditions
- Abdominal Aortic Aneurysm, Juxtarenal Abdominal Aortic Aneurysm, Pararenal Abdominal Aortic Aneurysm, Thoracoabdominal Aortic Aneurysm
- Trial name
- NCT06969729
- Testing
- Physician-Modified Fenestrated Stent-Graft (3D-Printed Template-Guided)
- Where
- Poland
- Volunteers
- 100 people
- Sponsor
- Samodzielny Publiczny Szpital Kliniczny nr 2 PUM
Spine Trauma (Thoracic and Lumbar)
3D Printing in Preoperative Planning in Thoracic and Lumbar Spine Trauma
Case series of 16 patients with lower lumbar or lower thoracic traumatic injuries treated with pedicle screw fixation. Patients were divided into two groups (n≈8 per group).
- Trial name
- NCT07727161
- Testing
- Spine stabilization using CT planning, Spine stabilization using 3D-printed model planning
- Where
- Czechia
- Volunteers
- 16 people
- Sponsor
- Masarykova Nemocnice v Usti nad Labem, Krajska Zdravotni a.s.
Tooth Decay
Comparing the Clinical Success of Two Different CAD/CAM Full Cuspal Coverage Onlays
This is a single-center, ten-year, randomized controlled, split-mouth clinical trial. A total of 164 adult patients requiring full-cuspal coverage onlays will be enrolled.
- Trial name
- CUSTOM (NCT07519382)
- Testing
- full cuspal covarage onlay
- Where
- Hungary
- Volunteers
- 164 people
- Sponsor
- Semmelweis University
Palatability Assessment of 3D-printed Chewable Tablets in Children and Adolescents
Chewable Tablets Produced by Three-Dimensional Printing: A Sensory Acceptability Study in Children and Adolescents
The lack of appropriate pediatric formulations compromises adherence and the effectiveness of oral treatment in children, mainly due to the splitting of adult tablets and low sensory acceptability.
- Trial name
- ACEITA3D (NCT07424495)
- Volunteers
- 100 people
- Sponsor
- University of Brasilia
Dental Implant
Surface Topography and Color Stability of Conventional, 3D Printed, and Milled Provisional Restorations.
Patient attending the Outdoor Patient Department of the Department of Prosthodontics at Post Graduate Institute of Dental Sciences, Rohtak will be screened.
- Trial name
- NCT06946693
- Testing
- To evaluate the color stability and surface roughness of implant supported provisional restorations fabricated using conventional technique, milling, and 3D printing in mandibular posterior region.
- Where
- India
- Volunteers
- 36 people, healthy volunteers welcome
- Sponsor
- Postgraduate Institute of Dental Sciences Rohtak
Coronary Arterial Disease (CAD), Bypass Graft Occlusion
Cardiac Computed Tomography Based 3-D Printing for Optimized Coronary Artery Bypass Graft Surgery
Coronary artery bypass graft surgery (CABG) is a preferred surgical treatment in patients with widespread coronary artery disease.
- Trial name
- 3DCABG (NCT07039838)
- Testing
- 3D print of coronary arteries
- Where
- Denmark
- Volunteers
- 200 people
- Sponsor
- Jesper James Linde