Clinical trials: CAD-CAM
Peri-implant Soft Tissue Healing
Soft Tissue Response and IL-1β Levels Around CAD/CAM-Milled vs 3D-Printed PMMA Healing Abutments
This study looked at how the gums and tissues around dental implants heal when using two different types of temporary healing caps made of PMMA (a common dental material).
- Trial name
- NCT07287722
- Testing
- CAD/CAM-Milled PMMA Healing Abutment, 3D-Printed PMMA Healing Abutment
- Where
- Egypt
- Volunteers
- 22 people, healthy volunteers welcome
- Sponsor
- Ali Hassan Eid Toto
Dental Caries
Clinical Performance of Fiber Reinforced FRC Base and Bonded CAD/CAM Resin Composite Endocrowns
This research proposal is introduced to clinically test short fiber reinforced flowable resin composite material (everX Flow, GC Europe) as a supporting base under CAD/CAM resin composite endocrowns due to gap of knowledge…
- Trial name
- NCT06348979
- Testing
- Fiber flowable (SFRC) support below hybrid nanoceramic endocrowns, all ceramic Endocrowns (emax)
- Where
- Egypt
- Volunteers
- 110 people, healthy volunteers welcome
- Sponsor
- Cairo University
Guided Surgery Accuracy, Dental Implant Failed
Sleeves Versus Sleeveless Template
To compare virtual planning accuracy of computer-assisted template-based implant placement using CAD/CAM stereolithographic surgical templates with or without metallic sleeves.Furthermore to compare open versus closed holes in…
- Conditions
- Guided Surgery Accuracy, Dental Implant Failed, Complications
- Trial name
- NCT03641365
- Testing
- Test group, Control group
- Where
- Italy
- Volunteers
- 30 people, healthy volunteers welcome
- Sponsor
- Osstem AIC
Indirect Tooth-colored Onlay Restorations in Posterior Teeth, Clinical Performance of Cervical-margin-relocated Onlay Restorations
Clinical Evaluation of Indirect Tooth-Colored Onlays With Cervical Margin Relocation
This study will evaluate the performance of three different tooth-colored onlay materials in adult patients' posterior teeth. First, investigators will use a bulk-fill composite resin to raise the cavity margin above the gum line…
- Trial name
- NCT07157410
- Testing
- Machinable lithium-disilicate ceramic onlay (IPS e.max CAD), Pressed lithium-disilicate ceramic onlay (IPS e.max Press), Machinable composite onlay (BRILLIANT Crios)
- Where
- Egypt
- Volunteers
- 18 people, healthy volunteers welcome
- Sponsor
- Mansoura University
Dental Caries, Dental Restoration, Permanent
Comparison of Clinical Performance of Partial Restorations Fabricated With Three-Dimensional Printer and CAD-CAM
The aim of this clinical study is to compare CAD-CAM and 3D restorations in individuals with two hard tissue losses or restorations in their mouths.
- Conditions
- Dental Caries, Dental Restoration, Permanent, Tooth Diseases
- Trial name
- NCT07031856
- Testing
- 3D printer partial crown, Treatment as usual
- Where
- Turkey (Türkiye)
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- Cukurova University
Dental Restoration Failure
Clinical Performance of Two Different Resin-Matrix Ceramic Restorations
This study was designed to evaluate and compare the 2-year clinical performance of two different resin-matrix ceramic inlays
- Trial name
- NCT07265609
- Testing
- inlays
- Where
- Egypt
- Volunteers
- 12 people, healthy volunteers welcome
- Sponsor
- Mansoura University
Bone Loss
CAD-CAM PEEK Framework for All-on-4 Implants
This study was conducted to evaluate the clinical peri-implant soft tissue changes during the first year after occlusal loading and the ridge base relation after 3 years for mandibular computer-aided design and computer-aided…
- Trial name
- NCT06017596
- Testing
- PEEK framework
- Where
- Egypt
- Volunteers
- 16 people, healthy volunteers welcome
- Sponsor
- Mansoura University
Caries of Infancy
Clinical Evaluation of Polymethyl Methacrylate CAD/CAM Crowns Versus Prefabricated Zirconia Crowns in Primary Molars
, in this studythe investigator will compare between ready-made zirconia crowns and Computer-aided design and Computer-aided manufacturing (CAD/CAM) polymethyl methacrylate (PMMA) crowns to overcome the disadvantages of…
- Trial name
- NCT06113770
- Testing
- preparation of the tooth to receive ready made zirconia crown, preparation of the tooth to receive CAD CAM PMMA custom made crown
- Where
- Egypt
- Volunteers
- 17 people, healthy volunteers welcome
- Sponsor
- Adel Sherif Mostafa Rehab
Hyaluronic Acid (HA)
A Comparative Clinical Assessment of Adjunctive Hyaluronic Acid With 3D Printed Versus Milled CAD CAM Provisional Dental Restorations on Active Periodontal Status and Surface Roughness and Biocompatibility
A Comparative Clinical Assessment of Adjunctive Hyaluronic Acid with 3D Printed Versus Milled CAD CAM Provisional Dental Restorations on active Periodontal status and Surface Roughness and biocompatibility (A Randomized…
- Trial name
- NCT07625839
- Testing
- commonly used hyaluronic Acid with both procedures 3D Printed Versus Milled CAD CAM Provisional Dental Restorations
- Volunteers
- 60 people, healthy volunteers welcome
- Sponsor
- Cairo University
Dentofacial Deformities
The Use of Bone-borne Guides in Orthognathic Surgery Cases
The present study was conducted to evaluate a new design of the intermediate stent that is used in orthognathic surgery cases requiring Le Fort I osteotomy.
- Trial name
- NCT04224805
- Testing
- Bone-borne CAD/CAM splint, 3D interocclusal conventional splint
- Where
- Egypt
- Volunteers
- 16 people, healthy volunteers welcome
- Sponsor
- Alexandria University
Macrogenia, Microgenia
Evaluation of The Accuracy of CAD-CAM Custom Made Titanium Miniplates In Positioning of the Genial Segment in Computer Guided Genioplasty
In patients with chin deformeties, will using a custom made titanium plate in the positioning of the genial segments give an accurate results in comparison to the preoperative planned osteotomy and move of the Genioplasty.
- Conditions
- Macrogenia, Microgenia, Miniplate
- Trial name
- NCT03647865
- Testing
- Osseous Genioplasty
- Where
- Egypt
- Volunteers
- 10 people, healthy volunteers welcome
- Sponsor
- Cairo University
Periimplantitis
Comparison of Denture Base Adaptation and Per-iimplant Tissue Health Between CAD and CAM Implant Overdenture
Background: Complete overdenture manufacturing has been greatly developed using computer-aided designing and computer-aided manufacturing (CAD-CAM) technology.
- Trial name
- NCT06166446
- Testing
- subtractive technique, additive technique
- Where
- Egypt
- Volunteers
- 15 people, healthy volunteers welcome
- Sponsor
- Mansoura University
Mandibular Distal-extension Prostheses
Periodontal Health and Patient Satisfaction of CAD/CAM Fiber-Reinforced vs. PFM Attachments in Distal Extension RPDs
This randomized clinical trial aims to assess periodontal health and patient satisfaction in mandibular distal extension removable partial dentures using CAD/CAM fiber-reinforced composite versus porcelain-fused-to-metal…
- Trial name
- NCT06871020
- Testing
- Mandibular removable partial denture retained on OT extracoronal attachment made from fiber-reinforced composite resin, Mandibular removable partial denture retained on OT extracoronal attachment made from porcelain-fused to metal
- Where
- Egypt
- Volunteers
- 24 people, healthy volunteers welcome
- Sponsor
- Ain Shams University
Dental Caries
Investigation of the Effect of Deep Margin Elevation Technique on the Clinical Performance of Endocrown Restorations Produced by Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) System
The aim of this clinical study is to investigate the impact of the deep margin elevation technique on the clinical performance of CAD/CAM endocrown restorations in deep Class II cavities.
- Trial name
- NCT06222918
- Testing
- Deep Margin Elevation (G-ænial Universal Injectable)
- Where
- Turkey (Türkiye)
- Volunteers
- 100 people, healthy volunteers welcome
- Sponsor
- Hacettepe University