Clinical trials: Bracket Bonding
Orthodontics, Bracket Bonding
Indirect Bonding Accuracy of 3D Printed Digital Transfer Trays
The goal of this study is to compare the bracket transfer accuracy of two frequently used 3D printed indirect bonding trays. This is an interventional study. Participants have 3-6mm crowding without tooth loss and deformity.
- Conditions
- Orthodontics, Bracket Bonding, Indirect Bonding, Digital Indirect Bonding Transfer Tray
- Trial name
- NCT06167278
- Testing
- Indirect bonding with two different digital bracket bonding transfer tray
- Where
- Turkey (Türkiye)
- Volunteers
- 30 people, healthy volunteers welcome
- Sponsor
- Marmara University
Inaccurate Transfer and Bond Failure of Conventional Indirect Bonding Tray, Accuracy of Bracket Transfer and Bond Failure Rate of Full Arch and Segmented Digitally Printed Trays
Evaluation of Segmented Versus Full Arch Three Dimensionally Printed Transfer Tray for Orthodontic Indirect Bonding
This study is conducted to overcome the problems of conventional indirect bonding technique, through investigating accuracy of two novel three dimensionally digitally printed indirect bonding transfer trays (full arch \&…
- Trial name
- NCT03564717
- Testing
- Segmented three dimensionally printed transfer tray
- Volunteers
- 132 people
- Sponsor
- Cairo University
Malocclusion; Displaced Teeth
Can Magnification Loupes Make the Bracket Bonding Procedure Faster and More Comfortable?
This study aims to evaluate whether using 3.5x dental magnification loupes improves the speed and patient comfort of the orthodontic bracket placement procedure in patients with crowded dentition, a condition that can make the…
- Trial name
- NCT07474389
- Testing
- Loupes-based bonding, Traditional bonding
- Where
- Syria
- Volunteers
- 60 people
- Sponsor
- Damascus University
Orthodontics, Bracket Bonding
Comparison of Bond Failure with Resin-modified Glass Ionomer Cement and Visible Light-cure Composite Bonding Material in Adult Orthodontic Patients - a Split-Mouth, Randomized Controlled Trial
In this split mouth study design, 34 orthodontic patients coming for fixed appliance treatment will be bonded with standard light-cure composite bonding material and intervention of Resin Modified Glass Ionomer Cement (RMGIC).
- Conditions
- Orthodontics, Bracket Bonding, Malocclusion; Displaced or Missing Teeth
- Trial name
- RMGIC (NCT06602154)
- Testing
- Resin modified glass ionomer
- Where
- 2 sites in Pakistan
- Volunteers
- 37 people, healthy volunteers welcome
- Sponsor
- Aga Khan University Hospital, Pakistan
Bracket Bonding, Digital Application
ACCURATE ORTHODONTIC BRACKETS POSITIONING WITH OR WITHOUT DENTAL MAGNIFYING LOUPES
The goal of this clinical trial is to assess the accuracy of bracket positioning on tooth facial axis of clinical crown with dental loupes (L) or without dental loupes (NL) on orthodontic patients.
- Conditions
- Bracket Bonding, Digital Application, Technology-enhanced Learning
- Trial name
- NCT07134803
- Testing
- Bonding of the orthodontic brackets with dental loupe with Zumax Dental loupes DFK Angled Loupe with a magnification of x3.0 and focus depth of 42cm
- Where
- Malaysia
- Volunteers
- 18 people, healthy volunteers welcome
- Sponsor
- University of Malaya
Orthodontic Appliance Complication, Malocclusion
Comparison of Precision in Brackets Position in Two Indirect Bonding Materials
Objective: To compare the cementation precision of self-ligating brackets between two indirect bonding materials: polyvinylsiloxane and thermal glue. Methods: Split-mouth randomized clinical trial study, with 15 participants.
- Trial name
- IDBmaterials (NCT05483114)
- Testing
- Accuracy of indirect bonding of self-ligating brackets made with polyvinylsiloxane transfers, Accuracy of indirect bonding of self-ligating brackets made with thermal glue transfers
- Volunteers
- 15 people, healthy volunteers welcome
- Sponsor
- Fundación Universitaria CIEO
Dental Bonding, Orthodontic Brackets
Segmented Indirect Versus Direct Bracket Bonding
This randomized clinical trial compared two methods of attaching orthodontic brackets to teeth: conventional direct bonding, in which each bracket is placed and bonded individually in the mouth, and a segmented modified indirect…
- Trial name
- NCT07861178
- Testing
- Direct bonding, Segmented modified indirect bonding
- Where
- Saudi Arabia
- Volunteers
- 18 people, healthy volunteers welcome
- Sponsor
- Riyadh Elm University
Inaccurate Transfer and Bond Failure of Conventional Indirect Bonding Tray, Accuracy of Bracket Transfer and Bond Failure Rate of Digitally Printed Transfer Tray With Windows and Conventional Thermoformed Transfer Tray
Accuracy of 3DPrinted Windowed Bracket- Positioning Guide Compared To Thermoformed Indirect Bonding Tray
this study was aimed to evaluate of accuracy of 3DPrinted windowed Bracket- Positioning Guide in compare to Thermoformed Transfer Tray For Orthodontic Indirect Bonding
- Trial name
- NCT03585881
- Testing
- 3DPrinted Windowed Bracket- Positioning tray
- Volunteers
- 132 people
- Sponsor
- Cairo University
Malocclusion
A Comparison of the Alignment Achieved Using Computer-guided Indirect Bonding of Orthodontic Brackets to Conventional Appliance Placement
Technological advances have made computer aided orthodontic treatment planning possible. 3D dental scanners and software make it possible to design and approve the outcome before treatment begins.
- Trial name
- NCT02221856
- Testing
- Motion View, Conventional Orthodontic Treatment
- Where
- United States
- Volunteers
- 30 people, healthy volunteers welcome
- Sponsor
- Harvard School of Dental Medicine
Bracket Failure, Bracket Bonding
Comparison of Bond Failure Rate of Orthodontic Brackets Bonded With V-Prep and Resin-Modified Glass Ionomer Cement Versus Conventional Acid-Etch Composite Resin
Ethical approval will be obtained by the FUSH and informed consent will be obtained from individual patients/guardians in writing.
- Conditions
- Bracket Failure, Bracket Bonding, RMGIC, Conventional Bracket Bonding
- Trial name
- NCT07828431
- Testing
- V-Prep and Resin-Modified Glass Ionomer Cement, Conventional Acid-Etch Composite Resin
- Where
- Pakistan
- Volunteers
- 80 people, healthy volunteers welcome
- Sponsor
- Foundation University Islamabad
Augmented Reality
Augmented Reality-Assisted Bonding Versus Digitally-Assisted Indirect Bonding in Orthodontic Patients
Comparing two indirect bonding techniques. Augmented Reality-assisted bonding and Digital 3D printed indirect bonding trays in regards to patient convenience, accuracy of bracket placement and time consumption of each technique…
- Trial name
- NCT04658446
- Testing
- Augmented Reality-Assisted Indirect Bonding, Digitally-Asssited Indirect Bonding
- Volunteers
- 8 people, healthy volunteers welcome
- Sponsor
- Seif El-Din Amr Hussein Hegab
Orthodontic Brackets
Digital Bonding vs. Direct Bonding Study
This is a prospective, 2-armed, randomized, multi-site clinical study to demonstrate that digital bonding is a more efficient treatment method than direct placement of brackets.
- Trial name
- NCT06266130
- Testing
- Treatment Group Digital Bonding Tray, Control Group Direct Bonding
- Where
- 5 sites in United States
- Volunteers
- 138 people, healthy volunteers welcome
- Sponsor
- Solventum Orthodontics Corporation
Malocclusion
Evaluation of a "Flash-free" Adhesive Resin for Orthodontic Bracket Bonding
The purpose of this study is to compare bonding time, bond survival, amount of adhesive remaining on the tooth surface after bracket debonding, and time required for adhesive remnant cleanup between a new "flash-free" and a…
- Trial name
- NCT02030002
- Testing
- APC Flash-Free Adhesive Coated Appliance System, APC II Adhesive Coated Appliance System
- Where
- United States
- Volunteers
- 49 people, healthy volunteers welcome
- Sponsor
- University of Minnesota
Malocclusion, Angle Class I, Dental Crowding
Bracket Positioning Techniques and Quality of Orthodontic Finishing
This three-arm randomized clinical trial compares three orthodontic bracket positioning techniques - Smile Arc Protection (SAP), Smile Arc and Marginal Ridge Approach (SAMRA), and the McLaughlin-Bennett-Trevisi (MBT) bracket…
- Trial name
- NCT07708363
- Testing
- Smile Arc Protection (SAP) bracket positioning, Smile Arc and Marginal Ridge Approach (SAMRA) bracket positioning; Procedure, McLaughlin-Bennett-Trevisi (MBT) chart bracket positioning
- Where
- Egypt
- Volunteers
- 39 people
- Sponsor
- Future University in Egypt
Dental Etching, Dental Bonding
Comparison of Orthodontic Bracket Bond Failure Using Acid Etching With or Without Sandblasting
The goal of this clinical trial is to assess if sandblasting before acid etching reduce orthodontic bracket bond failure in fixed orthodontic treatment.
- Conditions
- Dental Etching, Dental Bonding, Acid Etching, Acid Etching, Dental
- Trial name
- AE SBE BF BB (NCT07617480)
- Testing
- Sandblasting with acid etching vs Acid etching alone, Acid Etching only
- Where
- Bangladesh
- Volunteers
- 15 people, healthy volunteers welcome
- Sponsor
- Tanzila Rafique
Orthodontic Appliance Complication
The Validity of Customized Orthodontic Bracket Set up
CAD/CAM systems have assisted orthodontists in planning and positioning brackets to minimize errors and improve the excellence of treatment.
- Trial name
- NCT05549089
- Testing
- Insignia™ twin brackets, Maestro® 3D Ortho Studio software (Discovery, Dentaurum®, Ispringen, Germany), Ray set® device (Discovery, Dentaurum®, Ispringen, Germany)
- Where
- Iraq
- Volunteers
- 30 people, healthy volunteers welcome
- Sponsor
- Ammar Alubaydi
Dental Malocclusion
A Clinical Trial on the Failure Rates of Metallic and Ceramic Orthodontic Brackets
The aim of this study is to assess if there are significant differences in the failure rate of stainless steel and ceramic brackets.
- Trial name
- NCT05151991
- Testing
- Fixed orthodontic treatment with stainless steel brackets, Fixed orthodontic treatment with ceramic brackets
- Where
- Italy
- Volunteers
- 80 people
- Sponsor
- University of Pavia
Tooth Demineralization, White Spot Lesion
Comparison of a 3-step Bonding System (Transbond™ XT) and a 2-step System (GC Ortho Connect™) on Demineralization Around Maxillary Orthodontic Brackets
White spot lesions (WSLs) are one of the most common adverse effects of fixed orthodontic treatments, affecting up to 97% of patients treated with labial appliances.
- Conditions
- Tooth Demineralization, White Spot Lesion, Demineralization, Orthodontic Appliance Complication
- Trial name
- ORTHOCOLLAGE (NCT07355322)
- Testing
- Transbond™ XT bonding procedure, GC Ortho Connect™ bonding procedure
- Where
- France
- Volunteers
- 34 people
- Sponsor
- University Hospital, Montpellier
Dental Malocclusion
Eighteen-month Orthodontic Bracket Survival Rate With the Conventional Bonding Technique Versus RMGIC and V-prep
The aim of this study was to evaluate over eighteen months the clinical bonding failure and survival rates of the conventional bonding technique using the Transbond XT (3M Unitek, Monrovia, California, USA) and the RMGIC Fuji…
- Trial name
- NCT05939102
- Testing
- v-prep combined with RMGIC for bracket bonding, Conventional bracket bonding technique
- Where
- Lebanon
- Volunteers
- 25 people, healthy volunteers welcome
- Sponsor
- Saint-Joseph University
Dental Bonding
Transfer Accuracy of 3D-printed Indirect Bonding Trays
This study evaluates the transfer accuracy of 3D-printed trays for indirect bonding of orthodontic brackets in vivo. Accurate placement of orthodontic brackets at the beginning of treatment improves treatment efficiency and…
- Trial name
- NCT04683874
- Testing
- 3D printed tray
- Where
- United States
- Volunteers
- 23 people
- Sponsor
- Thorsten Gruenheid